EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KU1550VP0 Roper Trash Compactor - Parts

1 - 12 of 134

Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Drive Gear Kit – Part Number: 882699
$77.75
In Stock
Drive Gear Kit
★★★★★
★★★★★
(60)
Part #882699
This is the drive gear kit for the ram that compacts the trash inside your compactor. If your compactor ram is getting stuck, there is excess noise during its cycle, or if your compactor does not stop at the end of its cycle, the driving gear may be the issue. The gear is white, plastic and approximately 4.5 inches in diameter. This drive gear kit includes both gears, pin spring, retaining clip (c-ring), ram stop, ram cam, and instructions. Make sure to disconnect the power to your trash compactor before beginning the repair.
Dryer Screw – Part Number: WP90767
$7.47
In Stock
Dryer Screw
★★★★★
★★★★★
(2)
Part #WP90767
This screw is sold individually.
15" Paper Compactor Bags - 12 Pack – Part Number: 675186
No Longer Available
15" Paper Compactor Bags - 12 Pack
Part #675186
Moisture-resistant liner. Pre-cuffed.
Trash Compactor Directional Switch – Part Number: WP777811
$57.38
In Stock
Trash Compactor Directional Switch
★★★★★
★★★★★
(17)
Part #WP777811
Here's a reliable solution when you need to get your microwave working as good as new - the GE Advantium Metal Tray. At the heart of your microwave, this tray works tirelessly to rotate your food, delivering evenly cooked meals every time. The tray is non-stick, making your cleaning process a breeze. The tray is incredibly easy to fit into your microwave. Just follow the simple instructions in the owner's manual, and you'll have it set up in no time. The best part? It?s designed to perfectly enhance the performance of your microwave, enriching your cooking experience from start to finish. Let this tray be the trusted ally for your microwave, brought to you by GE - a brand that's renowned for its long-lasting and high-quality home appliances. Remember, the right replacement part can make your appliance work like new again. This tray not only solves the problem of uneven heating but also ensures smooth functionality of your microwave over the years. So bring home the GE Advantium Metal Tray, and watch your microwave transform your kitchen and meal times.
Touch-Up Paint - White – Part Number: 72017
$24.15
In Stock
Touch-Up Paint - White
★★★★★
★★★★★
(7)
Part #72017
This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.
Rotary Switch Kit – Part Number: 675382
$97.57
In Stock
Rotary Switch Kit
★★★★★
★★★★★
(20)
Part #675382
The rotary switch kit is also known as the start switch or the on and off switch, and is used to power on your trash compactor. The function of the rotary switch kit is to control the electrical power that is going into your trash compactor. This process happens when the switch sendsvoltage to the motor to start the compacting cycle. If your switch is broken the trash compactor will not start. A multimeter test can be performed to test the switch for continuity. The rotary switch kit will come with an on and off rotary switch, and two chrome knobs.
Screw - 8-18 x 1/2 – Part Number: WP302868
$7.47
In Stock
Power Nut – Part Number: WP777533
$47.40
Special Order
Power Nut
★★★★★
★★★★★
(6)
Part #WP777533
This part is a power nut, and it is intended to be used in conjunction with trash compactors. The function of this nut is to fasten to the side of the ram where it is threaded. When the power screw rotates, it is fed through the power nut, which pulls the ram down to compress the trash. This part is just over an inch in diameter, and is just one inch thick. This part is white and made entirely of plastic. The reason for needing to replace this part is if your compactor ram gets stuck, or if it does not stop at the end of the compacting cycle.
Drawer Roller – Part Number: WP9871602
$17.15
In Stock
Drawer Roller
★★★★★
★★★★★
(6)
Part #WP9871602
This bearing roller may also be known as the wheel assembly or the container roller bearing, and it is a piece for your trash bin. The function of this bearing is to work in conjunction with your trash bin to allow the canister to roll free. For this repair you will need a nut driver, a pair of pliers, a screwdriver set, and an adjustable wrench. The most obvious symptom that will require you to replace this part is if your drawer is hard to open and/or close. Your appliance comes with two bearing rollers and it is sold individually.
Trash Compactor Single Metallic Shoulder Screw Size 832 X 3\8 – Part Number: WP780263
$7.47
In Stock
Spray Paint - 12 oz. - White – Part Number: 350930
$36.85
In Stock
Spray Paint - 12 oz. - White
★★★★★
★★★★★
(3)
Part #350930
Appliance spray paint is a great way to cover up any chips and scratches that have appeared on your appliances. Instead of replacing the part entirely, this is an easy fix. This is also a great way to give a fresh new look to any handles or areas that have discoloring due to wear. Make sure to clean the area before you begin and wear a protective mask for safety. Give the can a good shake and spray a few inches away from the surface. Apply the paint until the area is fully covered as desired. Wait until the paint has dried before using the appliance.
Wheel Assembly - Kit of 2 – Part Number: 882688
$27.36
In Stock
Wheel Assembly - Kit of 2
★★★★★
★★★★★
(8)
Part #882688
This wheel assembly, or roller assembly, is for a trash compactor. The kit includes two wheels that are approximately 1 inch in diameter each. The wheels allow the trash compactor container to roll in and out of the appliance. You may have to replace the wheel assembly if the container does not roll smoothly. To access the existing wheel kit on your appliance, uninstall appliance from the cabinet, depress foot petal to lift the container off its track, and remove the container from the tracks. This kit is an OEM part sourced from the authentic manufacturer factory.
1 - 12 of 134