KTRA2 Refrigerator - Parts

Sold individually.

This misty beige door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.

The ice maker thermostat, also known as the cycling thermostat, controls and regulates the ice maker ejection cycle by monitoring the temperature inside the freezer to determine when to release the ice into the bin and start the ice making cycle again. If your ice maker is making unusual noises, or if the ice maker is not making or dispen...Read moresing ice, there could be an issue with the thermostat. Before you begin this repair, make sure the power is disconnected from your refrigerator, and that any food that may spoil is safely stored. This is an OEM part and is sourced directly from the manufacturer. This thermostat is sold individually, and comes with two attachment clips.

The light socket in your refrigerator houses the light bulb and connects it to the power source. If your refrigerator light is not coming on when you open the door, you may need to replace the light socket. Before you replace the light socket, be sure that your light bulb is in working condition, as this may solve the same problem. This l...Read moreight socket kit comes with 2 wire connectors, a light shield, and the new socket. The wire connectors that come with this kit are included so your new socket can replace a variety of old ones. If this light socket is different than your original, you will need to use the connectors to make it fit your refrigerator. Be sure to follow the instructions provided, so this part will fit your refrigerator properly.

This refrigerator water inlet valve is engineered to regulate water flow to both the ice maker and water dispenser, ensuring consistent and reliable operation. When activated, the valve opens to allow water from the household supply line to enter the appliance’s dispensing systems. It plays a critical role in maintaining proper hydration ...Read moreand ice production functions. Replacing this component can resolve common issues such as water not dispensing, ice not forming, or leaks originating from the valve area. Compatible with a wide range of models, this part is designed for durability and precise performance. Installation may require basic tools and should be completed with the appliance disconnected from power and water sources.

This cap is biscuit in color.

This is a push-on start relay for your refrigerator. It attaches to the compressor and starts it by briefly boosting it. It will then shut off as soon as the motor is up to the required speed. You may need a new relay if your appliance is too warm or will not start. The tools you will need to make this repair include a flat-blade screwdri...Read morever and a pair of needle-nose pliers. This start relay measures to be just over one square inch.

NOTE: As per the manufacture the part does not come threaded. A self tapping screw will need to be used to make threads.

Sold individually.

This part may come in white or clear plastic, but either will still work and fit properly in your appliance.

This small hinge washer acts as a spacer between the refrigerator door and hinge. It helps keep the door aligned and reduces wear as the door moves. Replace a missing, cracked, or worn washer. Empty the door shelves and have another person support the door during installation. Use the exact model number to confirm fit.