EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KTM4432A Frigidaire Range - Instructions

All Instructions for the KTM4432A
61 - 75 of 105

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old Drip Bowls Corroded beyond Repair
0 of 1 people found this instruction helpful.
  • Todd A from Everson, WA
  • Really Easy
  • Less than 15 mins
I've been to many appliance repair stores looking for White-Westinghouse Stove Parts and have been told their 'unavailable'! Then I checked PartsSelect.com- and they were listed as 'available'. The 6" & 8" Drip Bowls shipped quick and arrived packed well. The new Drip Bowls aren't as heavily made as the originals- but they are exact repla cements and very easy to replace. The wife is happy and with many replacement parts & how-to-videos for repair we plan on keeping this stove for another 20 years!
Was this helpful?
Thank you for voting!
Range burner coil worked intermittenly
0 of 1 people found this instruction helpful.
  • MARK from LIBERTY LAKE, WA
  • Easy
  • Less than 15 mins
Unplugged range and cut wires on existing burner plug. Connected the replacement plug with the provided wire-nuts. Secured with provided shrink-wrap. Reattached burner plug to to range top, and plugged in the burner coil. Presto.
Was this helpful?
Thank you for voting!
rusty bowls
0 of 2 people found this instruction helpful.
  • Monty from Kenton, OK
  • Really Easy
  • Less than 15 mins
very easy
Was this helpful?
Thank you for voting!
Intermittent heating element function
0 of 2 people found this instruction helpful.
  • Jeffrey from Pittsburgh, PA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Instructions included with terminal block assembly. Toughest part was to strip the insulator off of the old wires on the stove. I was originally going to just purchase one but after looking at the other terminal blocks and seeing the burnt insulation and some of the wire strands, I just replaced all 4. PartSelect customer sevice was ve ry helpful to confirm the correct part number I needed for my stove.
Was this helpful?
Thank you for voting!
Renewed drip pans
1 of 6 people found this instruction helpful.
  • Frank from Winter Garden, FL
  • Really Easy
  • Less than 15 mins
Replace the old ones with the new ones. Was VERY impressed with the quick delivery!!
Was this helpful?
Thank you for voting!
heating elements not working
1 of 7 people found this instruction helpful.
  • christopher from cincinnati, OH
  • Easy
  • Less than 15 mins
  • Pliers
prepared the parts as directions displayed, removed the heating coils and popped the hood on the range, simple curcit 2 wires in to the main harness for each coil. snip, plug and twist add heat wrap to seal the new conections and done very simple fix saved me buying another oven....for now
Was this helpful?
Thank you for voting!
Control will not work - only clock blinks
0 of 4 people found this instruction helpful.
  • Sue from Lampasas, TX
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Took 3 panels off to get to the electric block. Replaced electrical block and put it back together. Still no change.
Was this helpful?
Thank you for voting!
Electric Range Element's Not Heating
  • Robert from Waldorf, MD
  • Easy
  • 1- 2 hours
  • Screw drivers
Reviewed the online repair video a few times then got started. Although only two were bad, I replaced all four terminal blocks. I removed the range top instead of using the built in kick stands. this left me much more room to work and I was able to clean the top of the range really well before getting started. Wires for the back terminals where short and a little difficult to use after cutting off the old terminal blocks. The terminal block mounting option for my style range included with the repair kit would not allow me to utilize the screw for the third wire on the left rear burner. I used a drill to carefully widen the hole in the mount to make the original screw fit as there are no screws included with the kit. This added the extra time to complete the repair. Over all the repair was simple to complete but having to modify the terminal block mount was dissapointing considering the web site selected parts for my specific model number. Still a bargain compared to what a service call or new purchase costs. I will be reparing my ranges from now on.
Was this helpful?
Thank you for voting!
Range top burner wouldn't work
  • Evelyn from Perryville, MD
  • Really Easy
  • Less than 15 mins
Got new surface element. Unplugged the old element, plugged in the new surface element, turned the stove top on, and it worked! Took less than 5 minutes and I'm pleased! Will probably or the same two so all my elements are nice and new. Great experience.
Was this helpful?
Thank you for voting!
drip pans old and rusted
  • linda from decatur, AL
  • Really Easy
  • Less than 15 mins
unplugged the elements, removed drip pans, replaced with new drip pans. plugged back in elements. took no skills or effort. the parts were ordered on-line one afternoon and were on my doorstep the next morning. I had been unable to find drip pans that fit my stove and was thrilled that they fit and came so quickly and were reasonably pric ed.
Was this helpful?
Thank you for voting!
drip bowl purchased at local store was wrong size
  • james from lockport, NY
  • Really Easy
  • Less than 15 mins
purchased correct part from PartSelect and it fit like a glove!
Was this helpful?
Thank you for voting!
surface element burned out
  • Jane from Athens, OH
  • Really Easy
  • Less than 15 mins
simply unplug the old burner and plug the new one it. not many repairs this easy. the best part of the whole thing is that the part arrived the next day.
Was this helpful?
Thank you for voting!
Replaced burner block
  • Glenn from Fossil, OR
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Looked at the instructions and cut the wires, put the new wires in the block, attached the block to the range, put the new wires to the range wires using the wire nuts. I plugged the element into the block turned on the power, tried the element and it worked. It was really a easy repair.
Was this helpful?
Thank you for voting!
drip bowls on stove rusty
  • Kenneth from Osseo, WI
  • Really Easy
  • Less than 15 mins
they were for my 90 year old mom. she dropped them in by herself, perfect fit....thanks very much
Was this helpful?
Thank you for voting!
old element worn out
  • Janet from Virginia Beach, VA
  • Really Easy
  • Less than 15 mins
Removed old element and plugged in the new. Very simple and easy. Shipping and delivery was amazingly fast!
Was this helpful?
Thank you for voting!
All Instructions for the KTM4432A
61 - 75 of 105