KTM285940C Frigidaire Range - Parts

This is a flat style oven igniter used to light the oven burner in a gas range. When the element in this igniter glows white hot, the gas is released from the safety valves, which lights the oven burner. If your range is not heating properly, or not heating at all, it might indicate a problem with this part. If the element in the igniter ...Read moreis only glowing red or orange, or not glowing at all, it will need to be replaced. This is a shorter style igniter. It is 3.72 inches in length, and it features an 18-inch wire lead. This kit includes the igniter, an instruction sheet, a mounting bracket, and the two ceramic wire nuts needed for installation. This part has an amperage range of 3.2 to 3.6. Unplug your appliance before you start any repair work.

Oven racks can become rusted or damaged from constant use, and need to be properly maintained and cleaned to keep them working properly. If you notice that your oven rack has been damaged or rusted, the rack should be replaced. This oven rack has two anchor points on either side to keep it stable and secure within the oven. This ensures t...Read morehat your food stays in place when baking, and allows you to remove pots and pans without the threat of the entire rack falling out in the process. This metal oven rack measures 16 inches long x 23 inches wide, and is sold individually.

Used for both bake and broil. This part makes sure that no gas is released until the igniter gets enough power to ignite the gas range.

This is a gas range LP conversion kit for your gas range unit. It converts natural gas ranges to liquid propane (LP) gas. The kit contains four of the following: orifice, restrictor screw, burner restrictor, and burner choke. Each of these parts is less than an inch long. This kit also contains a label for the regulator, a rating/serial p...Read morelate, and a detailed instruction booklet with everything you need to complete the job efficiently.

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

When the gas burner valve knob is depressed and turned, this part creates a spark that lights the gas and starts the burner.

Sold Individually.