KSUS KitchenAid Refrigerator - Parts

This screw is sold individually.

The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure t...Read morehat the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.

Sold individually.

This dairy compartment door is located inside the refrigerator. It is used as a protective shield for your dairy products. If the door is broken or one of the mounting tops has broken off, it is best to replace it. To replace it, release the tabs and pull out old dairy door. Next, line up the new one by putting one side onto the peg and t...Read morehen pressing on the other side to flex it, eventually putting the other peg in. Make sure to open and close the shield to test it. Wear safety gloves as a safety precaution and remember to refer to the manual provided by the manufacturer for further installation instructions.

Sold individually - Appliance originally takes 3 of this part.

This is an ejector arm, and it is used in conjunction with your refrigerator. The function of this part is to act as a cube ejector inside your ice maker. The arm will rotate inside the ice maker to allow the ice cubes to fall out of the marker and into the ice bucket. This part is made entirely of plastic, is white in color, and has eigh...Read moret teeth. It measures just over 9 inches long, and one and a half inches wide. To make this installation the tools you will need include a quarter-inch nut driver, a flat-head screwdriver, and a Phillips screwdriver.

Glass ONLY.

Need a replacement part for your appliance that's quick, practical, and straightforward to use? Our GE Glass Touch and Control part is exactly what you're looking for. This user-friendly touchpad can be controlled with the simplest touch, making your appliance easier and more intuitive to operate. Uniquely designed with glass touch feat...Read moreures, it not only offers a high level of performance but adds a modern, stylish appeal to your appliance. Such a little change can make a huge difference to the overall feel of your kitchen. Produced by GE, a well-known brand that stands for quality and innovation, this part promises both durability and reliable operation. It?s the ideal solution to keep your appliance running smoothly and efficiently, ensuring it stays in peak condition for as long as possible. So why wait? Start experiencing the convenience and ease this GE Glass Touch and Control can offer you. Trust us, it isn't just a replacement part; it's a small investment into making your daily chores less of a drag. And remember, if you're not sure whether this part is compatible with your appliance, we're here to help figure it out.

This is activated by the ice dispenser arm.