EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KSSP42MFS05 KitchenAid Refrigerator - Instructions

All Instructions for the KSSP42MFS05
106 - 120 of 818

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice maker was leaking and had metal in the ice
3 of 4 people found this instruction helpful.
  • Charles from Newark, DE
  • Easy
  • 15 - 30 mins
  • Nutdriver
Removed the screws and disconnected the electric. I put the proper electric harness on and went to fit the unit in but it didn't fit. Until I figured out that you have to use the clips from the old unit that hold the unit in place. The actually hang on them. Once I figured it out it was easy.
Was this helpful?
Thank you for voting!
Ice maker quit making ice--had to either be a faulty switch in the ice maker or a faulty water valve. I guessed it was the ice maker switch and ended up being correct.
3 of 4 people found this instruction helpful.
  • Harvey from Port Tobacco, MD
  • Really Easy
  • 15 - 30 mins
  • Wrench set
It was exactly as everyone else described--remove old ice maker, unplug, plug in new ice maker, attach new ice maker. 3 screws, 1 plug. My plug was the one on the ice maker not on the refrigerator (ie I used the wiring/plug that was already in the freezer).
Was this helpful?
Thank you for voting!
ice maker quit
3 of 4 people found this instruction helpful.
  • Tim from Ewing, NJ
  • Really Easy
  • 15 - 30 mins
  • Socket set
i noticed that no water was getting to the ice maker. rather than messing around with parts, i bought the entire unit. easy to remove old one and install new one. thanks...ice started again in about an hour. unit cost less than a service call!
Was this helpful?
Thank you for voting!
Door light switch disintegrated
2 of 2 people found this instruction helpful.
  • Thomas from Roseville, CA
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Very simple fix, remove 3 screws, two connectors to the old switch
Was this helpful?
Thank you for voting!
Unit froze up with ice in the cube maker
2 of 2 people found this instruction helpful.
  • John from Mesa, AZ
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Just like the others. Unplug the refrigerator. Loosen the top two screw and remove the bottom screw. Unplug the unit, plug in the new one, slid the unit over the top two screws, replace the bottom screw and tighten the top two screws. Done. I ordered the unit Sunday it was shipped Monday and arrived Phoenix Wednesday, shipper then re routed it to Tucson Thursday who sent it back to Phoenix on Friday and finallydelivered it Saturday.
Was this helpful?
Thank you for voting!
Ice maker failed
2 of 2 people found this instruction helpful.
  • Kim from Palo Alto, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Super easy! I read all these posts but here are a couple helpful hints -

1. to remove the old icemaker definitely remove the one lower screw but then unscrew the top two screws only half way. The top screw holes on the old and new icemakers are triangle shaped so the old icemaker will simply lift off the half-unscrewed top scr ews. This makes reinstallation SO much easier.

2. carefully lower the loose icemaker enough to disconnect the wiring harness from the fridge and remove the old icemaker.

3. On installation the one thing to be careful with is the positioning of the fill tube. It's easier if it's in place when you reconnect the harness of the new icemaker because the harness is only as long as it must be.
4. hang the new icemaker on the half unscrewed top screws, snug them up, install the lower screw and flip the wire ice level sensor arm down.

I didn't even turn the water off because only a working icemaker can turn the water valve on and off.

Plugged in the power to the fridge and within an hour water filled the tray. By morning I had 2-3 batches of fresh ice in the bucket. Super easy.
Was this helpful?
Thank you for voting!
Broken plastic track for drawer in refrigerator.
2 of 2 people found this instruction helpful.
  • Franklin from La Mirada, CA
  • Easy
  • Less than 15 mins
  • Nutdriver
First, removed drawer and shelf with flip up lid. Second, removed 4 screws holding track in place and replaced with new part. Reinstalled shelf, flip up lid, and drawer. Easy fix with proper replacement part.
Was this helpful?
Thank you for voting!
My ice maker just stopped working
4 of 8 people found this instruction helpful.
  • Lori from Boca Raton, FL
  • Really Easy
  • Less than 15 mins
  • Screw drivers
I Removed 3 screws, pulled off the plate and put the new one on, screwed in 3 screws and away I went. I could not believe how easy it was to order the part and how quickly it arrived. I was very pleased. And I was literally screaming with excitement when I heard the first set of ice cubes drop!
Was this helpful?
Thank you for voting!
Ice maker went bad
3 of 5 people found this instruction helpful.
  • DENNIS from SOUTH LYON, MI
  • Really Easy
  • Less than 15 mins
  • Nutdriver
Took the old one out in Two Min's, Replaced with the new one in about the same time.
Had ice within 1 hour
Was this helpful?
Thank you for voting!
The ice maker stopped making ice
2 of 2 people found this instruction helpful.
  • Terry from Felton, PA
  • Really Easy
  • Less than 15 mins
  • Socket set
I removed the two attachment screws and lifted the old icemaker out and disconnected the plug. The new one was identical to the old one so the installation was just a reversal of the removal. The water soleniod was sticking from not being used so I took it apart and cleaned it. The next morning I had ice. The part arrived at my door in le ss than 24 hours from my order placement.
Was this helpful?
Thank you for voting!
The ice maker quit producing ice.
2 of 2 people found this instruction helpful.
  • Robert from Spring Valley, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
First I removed the ice bin to give me room to work. Then I took out the screws that held the old ice maker in place. I disconnected the wiring. I then plugged the wires of the new ice maker into the old wiring harness. I put in the bottom screws and loosely connected the top screws. I checked the level of the ice maker with a small l evel and then tightened the screws. The nest thing was to install wire level that shuts off the ice maker when the bin is full. Finally put the ice bin back in place.
Was this helpful?
Thank you for voting!
fridge door switch did not work
2 of 2 people found this instruction helpful.
  • stu from richmond, VA
  • Easy
  • Less than 15 mins
  • Socket set
I removed the switch housing (4 screws), replacing the switch in the housing was a snap. It took 5 minutes, cost $8 and light works like new!

Why didn't I order this part and do the repair earlier? Very simple.
Was this helpful?
Thank you for voting!
Ice maker quit. Got water out of ice dispenser
2 of 2 people found this instruction helpful.
  • Melvin from Girard, IL
  • Really Easy
  • Less than 15 mins
  • Socket set
Wathced video (VERY helpful)of how to do repair to make sure it was within my capabilities to do. Made sure I had all requested numbers before ordering. Replacement part was an EXACT fit. 15 minutes of work and I saved nearly $150 of estimate by local service company. I am (and will continue to be) a repeat customer. Thanks. Mel
Was this helpful?
Thank you for voting!
Ice maker stopped making ice
2 of 2 people found this instruction helpful.
  • Sean from Lancster, CA
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Removed the one screw holding the unit in place in the freezer and pulled it out. Removed the 3 screws that hold the motor in place on the ice maker. Replaced the motor unit, replaced the 3 screws, and re-installed the ice maker.
Sears wanted $170 for labor for the 10 minute job, plus $130 for the part, which I got here for $65.
Was this helpful?
Thank you for voting!
Unit wasn't producing ice
2 of 2 people found this instruction helpful.
  • Michael from Ocoee, FL
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
It actually took me longer to think about the repair than actually doing it. It was three screws, two upper that you just loosen and then one on the bottom that you remove. Pulled the unit out and disconnected the power. Slipped the new unit onto the two upper brackets, after connecting the power cord, tightened the bracket screws, reatta ched the bottom set screw and I was making ice. Incredibly easy. When I ordered the replacement unit they said it would arrive in 3-5 days, but it only took a day and a half. Great experience all the way through. I'm a customer for life.
Was this helpful?
Thank you for voting!
All Instructions for the KSSP42MFS05
106 - 120 of 818