KSSO48 KitchenAid Refrigerator - Parts

This 10-watt clear incandescent light bulb is designed to provide reliable interior illumination for household appliances such as dryers and refrigerators. Measuring approximately 2 inches in length, it fits securely into standard appliance sockets and activates when the appliance door is opened, offering clear visibility inside the drum ...Read moreor compartment. The bulb is suitable for use in a wide range of models across multiple appliance brands and is engineered to deliver consistent performance and durability. Installation is straightforward—simply screw the bulb into the designated socket within the appliance. Ensure the appliance is powered off before installation to maintain safety.

When an ice maker is not making ice, its OEM ice level control board kit may be the part to check. The kit’s emitter and receiver use an infrared beam to sense the ice level in the bucket and signal the ice maker to make more.

This part is located at the bottom of the ice bucket.

This refrigerator dispenser micro switch signals the appliance to release ice or water when you press the dispenser paddle. It responds to paddle movement, completing the electrical circuit while pressed and releasing it when your cup is removed. Worn contacts or a sticking mechanism may cause intermittent dispensing, no response, or disp...Read moreensing that fails to stop normally. Replacing a faulty switch helps restore reliable paddle control. Unplug the refrigerator before opening the dispenser housing or disconnecting wiring, and handle the wire terminals carefully during replacement. This is an OEM part sourced directly from the manufacturer.

This refrigerator water filter cap provides a grip for turning and removing the filter during replacement. The black plastic cover attaches to the exposed filter end near the bottom grille, giving the opening a neat, finished look. Cracks, broken tabs, or worn attachment points may cause the cap to loosen or turn without moving the cartri...Read moredge. Replacing a damaged cap restores a secure grip and tidy appearance. Save and transfer the cap when changing filters, and follow the filter removal directions to avoid forcing the connection. This is an OEM part sourced directly from the manufacturer.

This refrigerator ice maker fill cup dispenses the water into the ice cube mold during the fill cycle. Replacing the water fill cup is a possible solution if you notice that the ice maker is leaking, or not making/dispensing ice. If you notice the fill cup has been damaged or cracked; replace the part straight away. This water fill cup is...Read more a genuine OEM part and will fit most refrigerators, but check the list of compatible brands to make sure yours is included before purchasing.

This is the replacement water tube kit for your refrigerator. This tubing is made of plastic, is 1/4 inch in diameter, and comes with 2 inserts. This tube may be longer than the original tube, and may need to be cut. This water tube transports water to the ice and water dispensers. If your refrigerator is leaking, or if the ice and water ...Read moredispensers are not dispensing properly, you may need to replace this tube. This part is sold individually and is an OEM part sourced directly from the manufacturer.

This touch-up paint can be used on a wide variety of household appliances. It is most often used on washers, dryer, refrigerators, dishwashers, ranges, freezers, trash compactors, or microwaves. It is an 18 ml, or.6 fluid ounces, bottle of touch-up paint. It also features a brush for easy application. This quick-drying, long-lasting paint...Read more is perfect for fixing any nicks, scratches, or chips on the exterior of your appliance. This paint is white in color, and provides a durable finish.

Metallic screw that is less than an inch long. Does not include the plastic washer.

*Please note, this door chute is no longer being manufactured with a heater.

This refrigerator ice dispenser drive shaft transfers rotation from the motor to the auger inside the ice bucket. As the shaft turns, the auger pushes stored ice toward the dispenser chute. Worn ends, stripped edges, or a bent shaft may cause slipping, clicking, or no ice delivery even when the motor runs. Replacing a damaged shaft helps ...Read morerestore a firm connection and reliable dispensing. Unplug the refrigerator before accessing the drive assembly, and keep hands clear of the mechanism during use. This is an OEM part sourced directly from the manufacturer.

A warm refrigerator or noisy evaporator fan can indicate a problem with the fan blade. This white, four-blade OEM part circulates cold air over the refrigerator’s evaporator coils. Confirm fit using your refrigerator’s model number.