KSSC48QMS03 KitchenAid Refrigerator - Parts

The thermistor changes resistance as it senses the refrigerator temperature and sends a corresponding voltage to the pc board.

The body of this evaporator fan motor has four wires extending from the body, blue, red, yellow and one white one. This evaporator fan motor is located in the back of the freezer, and circulates air over the refrigerator coils. These coils will convert the heat into cool air, which is then circulated.

Sold individually.

This screw is sold individually.

This fan blade circulates air over the condenser. It mounts onto the shaft of the condenser fan motor.

This kit includes the motor, blade and bracket. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Use this bottle of stainless steel cleaner and polish for any of your stainless steel appliances.

This is an inverter board for a compressor.

The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure t...Read morehat the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.

This Icemaker is an OEM part for some Whirlpool refrigerators. This part produces ice automatically, ensuring a steady supply of ice cubes for daily use. Some causes of a bad icemaker can include a malfunctioning water inlet valve, damaged or clogged water lines, faulty heating elements, or issues with the control module. Some symptoms of...Read more a bad icemaker include, no ice production Smaller than usual ice cubes, leaking water around the icemaker, ice cubes getting stuck in the tray, unusual noises during the ice-making process.