- Home
- KSSC36QTS02
- Instructions
KSSC36QTS02 KitchenAid Refrigerator - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Ice Maker stopped producing
9 of 11 people
found this instruction helpful.
-
Brian from Alto, MI
- Really Easy
- 15 - 30 mins
-
Screw drivers
Used a voltage meter to detect the problem (used a video from the web to determine how to isolate the problem. I needed to replace the unit, that I had repaired two years ago for $150.00 or more for parts an a service call. The part I ordered came right away and the repair took about 15 minutes.
Was this helpful?
Thank you for voting!
Telfon coating peeling from ice maker mold
9 of 11 people
found this instruction helpful.
-
Larry from Merritt Island, FL
- Really Easy
- 15 - 30 mins
-
Nutdriver
Removed and replaced the ice maker
Was this helpful?
Thank you for voting!
Ice maker stuck and not making ice cube
8 of 9 people
found this instruction helpful.
-
Alain from Lutherville, MD
- Really Easy
- Less than 15 mins
-
Nutdriver
1- remove the ice make assembly to check out the ice maker: remove 3 screws with a nut driver, and aplug the electrical connector
2- checked that the ice maker assembly was not fixable (visual inspection)
3- Ordered an ice maker for PartSelect,
4- got it 2 days later, reconnected the electrical connector and put the 3 screw ... Read more s back
2- checked that the ice maker assembly was not fixable (visual inspection)
3- Ordered an ice maker for PartSelect,
4- got it 2 days later, reconnected the electrical connector and put the 3 screw ... Read more s back
Read less
Was this helpful?
Thank you for voting!
replacing thermostat did not help
10 of 15 people
found this instruction helpful.
-
John from Rocky River, OH
- Difficult
- More than 2 hours
-
Pliers, Screw drivers, Socket set
Icecubes came out half-way, and refrooze. I figured out, that the melter does not work (HEATER in the icemaker) Voltage measured 105V no load. Studied the Internet, and folloved an advice: shorted the back wire and the blackwire with white stripes.these go to relay contacts. It seems, that the relay contacts are no good on Infrared receiv
... Read more
er boaed. I turn off manually the icemaker, when needed
Read less
Was this helpful?
Thank you for voting!
Icemaker not working
8 of 10 people
found this instruction helpful.
-
Robert from Kansas City, MO
- Really Easy
- Less than 15 mins
-
Nutdriver
removed 3 screws with 1/4 nutdriver and unplug icemaker and removed from Refrigerator. Waited for 2 days and new icemaker arrived. Plug in icemakes mounted using the 3 screws. Done in less then 5 min. working fine.
Was this helpful?
Thank you for voting!
broke tab on cover bracket
8 of 10 people
found this instruction helpful.
-
brian from fresno, CA
- Really Easy
- Less than 15 mins
-
Nutdriver
removed old bracket and replaced with new one - two screws and it was done - simple
Was this helpful?
Thank you for voting!
Ice Maker not making ice
7 of 7 people
found this instruction helpful.
-
Alyson from Houston, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Being too lazy to pull out the refrigerator out and unplug it, I turned it off at the fuse box. Opened the freezer door and unscrewed the three screws holding the sensor. Pulled the sensor out and unscrewed the board then unpluged it and removed it. Plugged in new board, screwed it in then replaced the three screws. Repeat on the oth
... Read more
er side. The most difficult part was getting to one of three screws on each side; it almost required a third hand to hold the flap door between the ice maker and the bin, while removing said screw. I must at say that this product is definitely over engineered.
Read less
Was this helpful?
Thank you for voting!
light not working in fridge
7 of 8 people
found this instruction helpful.
-
Michael from East Meadow, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
It was so easy!
Thanks for the rush to my home on the part.
I just unscrewed the plate that locks in the light switch (screwdriver) and unplugged the old faulty part and plugged in the new switch, screwed the cover back on and I was done!
Easy!
And I am not Mr. Fix-it!
Thanks for the rush to my home on the part.
I just unscrewed the plate that locks in the light switch (screwdriver) and unplugged the old faulty part and plugged in the new switch, screwed the cover back on and I was done!
Easy!
And I am not Mr. Fix-it!
Was this helpful?
Thank you for voting!
Ice maker quit making ice, timing dial had broke
7 of 8 people
found this instruction helpful.
-
Robert from Lake Forest, CA
- Easy
- 15 - 30 mins
-
Nutdriver
After checking out the part number from the manuel that came with the fridge, I found out that the manual was wrong. After taking the old icemaker out I found it had a different part number on it. Looked it up at PartSelect and found out that the number on the old icemaker had changed. That was no problem and it was much cheaper than the
... Read more
one in the manuel. Anyway, I ordered the icemaker and believe it or not, I had it on my front porch the next day. It just had three screws to install and reattached the harness and it was done. Just to let everyone know it takes almost a good day before the ice started to come out, but then it started making ice as fast as before. Easy install and the price was great and service was very, very fast.
Read less
Was this helpful?
Thank you for voting!
The wrong filter was sent the first time.
8 of 11 people
found this instruction helpful.
-
Sandra S from Topeka, KS
- Difficult
- 15 - 30 mins
I removed the cap from the filter pushed a lever and removed fliter. I replaced the old filter, removed the caps on the new one and slid it into channel after replacing the outer cap. I removed water from the spigot for 4 mins. and it was ready to go. I pushed the reset button to get the green light to come on.
Was this helpful?
Thank you for voting!
Broken Piece
7 of 8 people
found this instruction helpful.
-
anthony from georgetown, IL
- A Bit Difficult
- 30 - 60 mins
-
Screw drivers
Had to disassemble ice maker to install part. . .
Was this helpful?
Thank you for voting!
Water filter
10 of 18 people
found this instruction helpful.
-
David from port st lucie, FL
- Really Easy
- Less than 15 mins
Just put the new one in.
Was this helpful?
Thank you for voting!
Water dispenser doesn't work, ice dispenser works fine
6 of 6 people
found this instruction helpful.
-
Stephanie from HAWTHORNE, CA
- Easy
- 30 - 60 mins
I found an EXCELLENT video (see link below) that shows with great detail how to change out several parts in the water/ice dispenser area on the freezer door for KitchenAid or Whirlpool brand, side by side units. This made my repair so easy!
https://www.youtube.com/watch?v=yK8ZnbQQ8qU
https://www.youtube.com/watch?v=yK8ZnbQQ8qU
Was this helpful?
Thank you for voting!
All three lights are not working...lights are off but refrigerator still cooling. Also, the control box not lit up to show the temparture for freezer and refrigerator
7 of 10 people
found this instruction helpful.
-
Antonio from San Antonio, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
Used a screw driver to pull old switch. Pulled one wire at a time, only two wires. After wires instlled to new switch push new one back in place where the old one was.
Was this helpful?
Thank you for voting!
light blew out
7 of 10 people
found this instruction helpful.
-
KELVIN from SOUTHFIELD, MI
- Very Easy
- Less than 15 mins
change light bulbs
Was this helpful?
Thank you for voting!