KRT1 - Parts

Sold individually.

Sold Individually. These fit on the tips of the shelf to keep it from sliding forward.

A filter-drier in a refrigerator has two essential functions. The first is to absorb system contaminants, such as water, which can create acids. The second is to provide physical filtration. This means trapping moisture, small metal chips, and dirt found in the refrigerant gas. If your refrigerator motor is constantly running, but the ref...Read morerigerator is not getting cold, the issue could be due to a damaged or faulty filter-drier. Faulty filter-driers are sometimes the cause for abnormal freezer compartment temperatures and partially frosted evaporators. This filter-drier is approximately 11 inches long. Remember to disconnect the power from your refrigerator before beginning this repair.

Sold individually.

This is a door/light switch and it is a replacement part for your refrigerator. This part is activated as you open and close your refrigerator door. When the switch is activated and the door is open it will turn the light on inside your appliance, and when you close the door the switch will deactivate the light. Before purchasing this par...Read moret, you may test it for continuity to determine if your current switch is defective and needs replacing. This model is white in color and measures to be roughly one inch thick, almost two inches high, and almost 1.5 inches deep, with a male end plug.

This refrigerator shelf support grommet helps secure and stabilize interior shelves by anchoring them firmly to the refrigerator liner wall. Made from durable white plastic, it helps keep wire or glass shelves properly aligned and prevents shifting, sagging, or instability during regular use. This part may need replacement if shelves become loose, uneven, or unable to properly support stored items.

The defrost heater keeps the cooling coils from frosting over.

1/4" x 5/8"

This ice container is white in color and made of plastic. This part lays flat inside the freezer compartment. The container is approximately 13 inches front to back, 10 inches side-to-side, and 5 inches deep, weighing 2 lbs. The ice container holds the ice in the freezer section for dispensing. Due to the frigid temperatures of your freez...Read moreer, plastic can break and crack over time and will need to be replaced. This is an OEM part that is sourced right from the manufacturer, ensuring the best possible quality.

This almond door gasket is used to seal the refrigerator door when closed to keep the cool air inside and the room air out.