Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I broke the pin that holds the lid that covers pantry at the bottom of the fridg.
2 of 2 peoplefound this instruction helpful.
Gerald from Grants Pass, OR
Really Easy
15 - 30 mins
Nutdriver
I removed the drawers above and the glass shelf, then removedthe screws to remove the broken end cap then reversed the proceedure to install the new part. Was simple to do and it works fine.
Was this helpful?
Thank you for voting!
Broken pin to door
2 of 2 peoplefound this instruction helpful.
Charlie from HARRODSBURG, KY
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
Easy
Was this helpful?
Thank you for voting!
Evaporator fan motor stopped working
2 of 2 peoplefound this instruction helpful.
Leah from HAMILTON, OH
Really Easy
15 - 30 mins
Nutdriver, Screw drivers
I'm a 37 year old woman who has never worked on a fridge before, ever. I was able to google how to run diagnostics on it and determine what the issue was. Once I received the part I was able to take apart the freezer to get to the motor. Remove the old motor and install the new motor. This was extremely easy I watched a
... Read morecouple of the youtube videos provided here and now it's running just fine.
Read less
Was this helpful?
Thank you for voting!
Wrong shelf
2 of 2 peoplefound this instruction helpful.
Robert from MANAHAWKIN, NJ
Very Difficult
Less than 15 mins
I ordered the wrong shelf. Width was correct but the Depth was not. Started the return process and I'm seeing its still processing. This is since 2/28/2024. 3 Weeks ago. On that same day I ordered what I hope is the correct one, but still haven't received it. Fingers crossed something happens soon.
Was this helpful?
Thank you for voting!
Took me less than 5 minutes to install both
3 of 5 peoplefound this instruction helpful.
Brian from BEVERLY, MA
Very Easy
Less than 15 mins
Pulled out old gasket and new one pushed right in with ease. Removed drawer trim and snapped in on new one in 30 sec. took longer to empty the drawer than it did to replace
Filter stopped up. Causing the refrigerator to make a loud noise. water dispenser didn't work. less than 4.00 fixed all that
3 of 5 peoplefound this instruction helpful.
Rodney B. from Crestview, FL
Really Easy
Less than 15 mins
Shut off water supply. filter is located in the upper right hand corner of the refrigerator on the inside. open the drop-down door. by hand pull the filter downward. then twist it to the left one quarter turn. it should pull out. I replaced it with a filter bypass plug. you can purchase a high quality filter to replace.it don't buy cheap
... Read morefilter.I made that mistake! hope this helps good luck!
Read less
Was this helpful?
Thank you for voting!
Did not have a ice pan
2 of 2 peoplefound this instruction helpful.
DEBRA from STATE COLLEGE, PA
Really Easy
Less than 15 mins
Ordered and placed in the freezer under ice machine.
Was this helpful?
Thank you for voting!
Tab broke off for chiller door.
2 of 2 peoplefound this instruction helpful.
Ed from SMITH, NV
Very Easy
Less than 15 mins
Socket set
Easy repair, nothing complicated.
Was this helpful?
Thank you for voting!
Head filter broke where you put the filter in
2 of 2 peoplefound this instruction helpful.
David from HARRISBURG, PA
Really Easy
30 - 60 mins
Wrench set
I watched a 5-minute YouTube video ordered the part. It was delivered fast and it took me about 30 minutes to put it on.
Was this helpful?
Thank you for voting!
Dropped a jar onto the pantry and broke the plastic piece on end cap that moved the drawer lid.
2 of 2 peoplefound this instruction helpful.
Terry from N SYRACUSE, NY
Really Easy
30 - 60 mins
Nutdriver, Screw drivers
Removed the lid and pantry drawer. Removed crisper drawer on right side and glass shelve. Removed 2 screws on glide. Removed 2 nuts with nut driver. Gently tugged on the pantry end cap and it released from the back wall. Had to rotate about 90 degrees to remove the extension off the back wall so I could remove the thermostat control arm f
... Read morerom old piece and put it onto the new piece. Gently removed the thermostat control through a series of squeezing pieces and rotations. Do not force anything. Take your time as you are working with plastic that could break at any moment with force. Replace in reverse order.
Read less
Was this helpful?
Thank you for voting!
ICE MAKER WATER FILTER HEAD REPLACEMENT
2 of 2 peoplefound this instruction helpful.
KENNETH from STOCKBRIDGE, MI
Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers
AS PER A VERY GOOD VIDEO I FOUND SIMPLY BY SEARCHING FOR THE PART NUMBER. IT MAY HAVE BEEN ON THIS SITE. SADLY, THE PUSHING ON THE CONNECTOR WITH THE 1/2" WRENCH LOOKED A LOT EASIER IN THE VIDEO, OTHERWISE EASY PEAZY AND I HAVE VERY PAINFUL ARTHRITIS IN MY SHOULDERS.
Was this helpful?
Thank you for voting!
Empty box sent with no part!!!! No customer service help because of covid
2 of 2 peoplefound this instruction helpful.
Jeffery from MIDLOTHIAN, VA
Very Difficult
More than 2 hours
No product was sent in the box for the shaft I received an empty box from them cannot perform any repairs because I got no product from this company. Called customer service said due to Covid no customer service available when online and receive no customer service no refund no product no help
Removed the freezer door, by loosening 4 screws and pulling upwards to disengage door from frame. Removed the top basket by pulling up on both slides on the gear shaft sides, note they have retaining tabs you must push in. once the slide / guards are up the top basket comes out. Remove the bottom basket. Remove to angled screws on the top
... Read more tracks and remove. Remove 6 screws on bottom slides, 3 per side and slide out as a whole unit. Unplug the ice maker, remove 3 screws for it to come out. Note I cleaned mine while it was out with vinegar to remove the mineral build up on it. Remove the screws in the back panel, and pull it forwards. The top vent has 2 clips that hold it in and you will need to remove it prior to fully removing the plate. The plug for the icemaker needs to be removed also. Pull the back plate out. Once the plate is out you can see the fan and access it. Unplug the clips that hold the wiring harness secure. 2 screws to remove the fan assembly. Once fan assembly is out, disassemble it, then reverse assemble it with new parts and fire it up. Mine took right off and running like its brand new.
Read less
Was this helpful?
Thank you for voting!
pulling the dairy draw out, a plastic knob broke,that keeps the cover on the draw on tight.
2 of 2 peoplefound this instruction helpful.
Daniel from Margate, FL
Easy
15 - 30 mins
Screw drivers
after pulling the draw out. had to remove 3 screws on the left side, pull out one part, and then replaced the broken pin. put everything back in place and it was done.perfect job.saved alot of money. thanks to part-select
Was this helpful?
Thank you for voting!
Bottom drawer access door hinge pin broke of pantry end cap - right side. The pin(knob) is a molded part of the end cap.
2 of 2 peoplefound this instruction helpful.
Neil from E GRAND RAPID, MI
A Bit Difficult
30 - 60 mins
Nutdriver
Removed two 1/4" screws from the end cap with the nut driver and removed it. Transferred a few pieces from the old end cap to the new. Reinstalled the new end cap and presto, job complete.
My Orders
