- Home
- KOCE507ESS01
- Instructions
KOCE507ESS01 KitchenAid Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
I broke the glass cooking tray when instaling my oven microwave combo
2 of 4 people
found this instruction helpful.
-
Jeff from Baytown, TX
- Really Easy
- Less than 15 mins
I put the tray in the microwave???? Pretty easy.
Was this helpful?
Thank you for voting!
Grill support broke. Sounds like a common problem based on other’s comment.
1 person
found this instruction helpful.
-
Andrew from LAKEVILLE, MN
- Really Easy
- Less than 15 mins
Turn the grill support 90 degrees to the opening in ceiling of micro. Insert then turn back 90 degrees so the support is in-line with the slot. Hang the wire on the support. Hours of worry over what this was gonna cost me to get repaired, then a 45 second fix costing only 29 bucks.
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people
found this instruction helpful.
-
RAYMOND from JACKSONVILLE, FL
- Really Easy
- Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
Microwave cooking glass broken
1 of 2 people
found this instruction helpful.
-
Navid from Dunn Loring, VA
- Really Easy
- Less than 15 mins
Easily replaced after received the product from Part Select. Very satisfied.
Was this helpful?
Thank you for voting!
Broken cooking tray
1 of 2 people
found this instruction helpful.
-
David from Oxnard, CA
- Really Easy
- Less than 15 mins
Replaced the glass tray
Was this helpful?
Thank you for voting!
glass tray missing
1 of 2 people
found this instruction helpful.
-
Carol from Phoenix, AZ
- Really Easy
- Less than 15 mins
found the part no. and ordered it. it was delivered fast and efficient.
tracking was also helpful.
thanks
tracking was also helpful.
thanks
Was this helpful?
Thank you for voting!
replace spindle on turning table
1 of 2 people
found this instruction helpful.
-
jeff from las vegas, NV
- Really Easy
- Less than 15 mins
exact part in with the new out with the old
Was this helpful?
Thank you for voting!
broken glass dish for microwave
1 of 2 people
found this instruction helpful.
-
Janet from Concord, CA
- Really Easy
- Less than 15 mins
no repair needed - ordered part, came within 3 days - very satisfied
Was this helpful?
Thank you for voting!
Oven light bulb inop
1 of 2 people
found this instruction helpful.
-
Ed from Canyon Country, CA
- Easy
- Less than 15 mins
Taking off the glass lense for the light bulb was harder than I thought. It unscrews counterclockwise, but it was very hard to get off. It would not turn. I ended up using connector pliers I use for work, that has rubber jaws. The lense unscrewed very easy with it. Light also unscrews out. PartSelect.com is the only way to go to buy parts
... Read more
for appliances. It is simple, even has the illustrated parts catalog. And it saves a lot of time and gas, driving around looking for the part!!. PartSelect came through again.
Read less
Was this helpful?
Thank you for voting!
Old microwave glass tray shattered while warming a hard-boiled egg.
1 of 2 people
found this instruction helpful.
-
Raymond from HINSDALE, IL
- Very Easy
- Less than 15 mins
I took the new tray out of the box and placed it in the microwave oven.. No tools needed.
Was this helpful?
Thank you for voting!
Part worn out
1 of 2 people
found this instruction helpful.
-
Kerry from Carrollton, TX
- Really Easy
- 30 - 60 mins
Could not complete the repair due to broken part when arrived. Reached out to service department but have not heard back. Maybe email did not go through due to pictures attached of part condition once arrived.
Was this helpful?
Thank you for voting!
The light in our microwave was out.
1 of 2 people
found this instruction helpful.
-
Michael from Ladson, SC
- Difficult
- More than 2 hours
-
Screw drivers
We had to remove screws from the vent covers above and below the microwave, then there were 2 screws (one on each side) that attached the microwave to the oven. Once all of the screws were removed we had to pull the microwave out. Then we pulled the light cord out, removed the burnt out light and installed the new one. Then reversed the
... Read more
steps.
Read less
Was this helpful?
Thank you for voting!
Oven light burnt out
1 of 3 people
found this instruction helpful.
-
Todd from TRENTON, MI
- Very Easy
- Less than 15 mins
Took off outer cover Popped out old bulb put in new one
Replaced cover
Replaced cover
Was this helpful?
Thank you for voting!
Broken Cook tray
0 of 1 people
found this instruction helpful.
-
Michael from Kansas City, MO
- Really Easy
- Less than 15 mins
Well the repair went Ok. The probelm happen on the following Monday. You see I ordered this part over the phone because I had to make sure it would arrive in time for Thanksgiving.
Was this helpful?
Thank you for voting!
broken meat probe
0 of 1 people
found this instruction helpful.
-
Daniel from Massey, MD
- Really Easy
- Less than 15 mins
My story isn't so much about the repair but the fine service from part select. My 1st order was lost at delivery at our house. Part select quickly corrected the mishap with no issues. This kind of service is much appreciated.
Was this helpful?
Thank you for voting!