- Home
- KMMF330PSS00
- Instructions
KMMF330PSS00 Whirlpool Microwave - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Microwave wouldn't turn on and found breaker been tripped and then microwave wouldn't turn on at all.
31 of 55 people
found this instruction helpful.
-
Daniel from DECATUR, GA
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Read some instructions and easily found the fuse. Replaced it. Still didn't work. Took control panel off to check door switches. Nothing I read mentioned a second fuse. Tested and it to had blown. Ordered another one. Popped them in. Done.
Was this helpful?
Thank you for voting!
machine was dead.
3 of 9 people
found this instruction helpful.
-
Mark from Smithtown, NY
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers
After removing the over-the-range unit (no small feat!) I had to figure out how to open the case (good puzzle!). Capacitor had already discharged, so it was very easy to reach in, pop the old fuse and install the new one! As per your advice, I found out I was a "28%-er"! Upon re-installation, the microwave "sprang to life"!! Thanks, "P
... Read more
art Select"!! I was already shopping around for a new machine! (Now if you could only tell me an easier way to re-mount this heavy beast over the stove!!!)
Read less
Was this helpful?
Thank you for voting!
Microwave had no electrical
1 of 5 people
found this instruction helpful.
-
Larry from HARKER HTS, TX
- Really Easy
- 30 - 60 mins
-
Pliers
I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.
Was this helpful?
Thank you for voting!
it was working fine and it stopped order a fuse and it wasn't the problem
0 of 4 people
found this instruction helpful.
-
Herb from Auburn, IN
- A Bit Difficult
- 1- 2 hours
took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse
Was this helpful?
Thank you for voting!
Put the Fuse in, then plugged it in came on for a min then everything went out!!!!!
4 of 18 people
found this instruction helpful.
-
Stephen from SPRINGFIELD, WV
- Very Difficult
- 1- 2 hours
-
Pliers, Screw drivers
Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!
Was this helpful?
Thank you for voting!
The capacitor was melted in the microwave
-
Jocelyne from Fort Pierce, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband open the microwave and see the capacitor melted. He try to find the piece in store,but unfortunatly he didn't find any. I found the piece on the web and ordered it. My husband replaced the part easily. The microwave work very well.The microwave was to our friend. He did replace it by a new one. Now we have a new microwave with
... Read more
a fan.
Read less
Was this helpful?
Thank you for voting!