KHMS14 KitchenAid Microwave - Instructions

Repair was very easy. We were more impressed with your selection and ordering process. Very quick as was needed for this job to be completed. Our customer was impressed that we found the part and that we were able to get it in so quickly. You helped us continue our professional service. Thank You

Replacement part was perfect and a quarter the price of the brand name grill. Snapped it in, tightened 2 screws, done! Also delivery of the part was almost overnight. You guys are the greatest.

I was sent the wrong fuse by you. I had to procure a fuse in another manner. Very disappointing. The repair was simple. It just took longer because of the failure to send the correct fuse.

Having the correct model number helps:
Just place the parts in the microwave and it worked.

found info on the internet how to install it. No problems replacing the part.

took it to Buttermore appliance in Auburn Indiana and he changed the fan and added another fuse

Took the front off and behind a plate was the fuse, so I replaced it for what good that did!!!

The repair was easy, I just took off a few screws and found the broken latch spring. The real story is how easy it was to find the replacement spring from Partselect! I couldn't believe they had it, and even better yet, I ordered it one afternoon, and it came the next day with normal shipping! Unbelievable! Then I just popped it in and r ... Read more eplaced the covers I had removed and it was working again!

Took the the want burned out , and put the new ones.

I just looked at the broken one to see where it broke and looked at the microwave. I realized that there were two screws that were supposed to hold the vent grill along with 3 slots on the bottom. I inserted the slots on the bottom into the preset spaces for them, lined up the top with the two screws and screwed them into place. Checked t ... Read more o make sure the screws were not too tight and that was it. New vent grill in place and ready to go.

replaced burnt parts

Not so sure this would qualify as "instructions", but I only needed a screwdriver because the "D" rings of the old vent filters broke off and I had to pry to old ones out. Keep in mind, I am mechanically disadvantaged and can barely change an A/C filter ... that being said, all I did for this order was input my Model number and PartSelec ... Read more t found the correct replacement part. I receive the parts super quick (faster than the other 2 purchases I did that day). The only bummer was the packaging ... super huge box for small tiny parts. Otherwise, I now know where to go for replacement parts. This project should be a "no-brainer" for most DYI's, so getting the right parts with just a model number was lifesaving for me :0)

My 17 yr old followed the directions and replaced the front a panel and handle in less than 25 minutes. He said it was easy and the directions were good.

remove old vent that was held in place by clips and two screws re-installed. Only problem is that should have ordered new clips was not aware that they did not come with the new vent

I removed the three screws holding the door trim panel and handle. It was an easy job and required a little force. I removed the glass and backing from the trim and removed the handle. I used two screws to remove the handle. I used a few pieces of double-sided tape tp secure the from glass panel in place. I them re-installed the door and ... Read more handle with the three screws and side of the door away from the hinge. Nice, neat and very easy job.