- Home
- KGCT025YWH1
- Instructions
KGCT025YWH1 KitchenAid Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replaced Stove knob
9 of 13 people
found this instruction helpful.
-
Robert from Middletown, NJ
- Really Easy
- Less than 15 mins
Removed old one, installed new one
Was this helpful?
Thank you for voting!
Grate pads fell off- burner scratched surface-need special glue
4 of 7 people
found this instruction helpful.
-
Sandra from Lake Wylie, SC
- Really Easy
- Less than 15 mins
-
Screw drivers
Bought in auto repair store special black glue used for sealing gaskets. Husband needed to use latex gloves, toothpicks, ice pick, and small screw driver to glue and install new burner pads.
Was this helpful?
Thank you for voting!
Plastic anchor tips broken.
3 of 4 people
found this instruction helpful.
-
Thomas from COLORADO SPGS, CO
- Very Easy
- Less than 15 mins
Removed the broken items and replaced.
Was this helpful?
Thank you for voting!
Old knobs fell apart
2 of 2 people
found this instruction helpful.
-
Retta from FLOWER MOUND, TX
- Very Easy
- Less than 15 mins
Just put new knobs on. Perfect fit.
Other Parts Used:
Was this helpful?
Thank you for voting!
Grommet broken
2 of 2 people
found this instruction helpful.
-
Ray from POST, TX
- Very Easy
- Less than 15 mins
Good
Was this helpful?
Thank you for voting!
2 control knobs were broken.
2 of 2 people
found this instruction helpful.
-
Sylvia from DELANO, CA
- Really Easy
- Less than 15 mins
I just replaced the broken knobs.
Was this helpful?
Thank you for voting!
Knob skirt clips (2 of 4) broken
2 of 2 people
found this instruction helpful.
-
John from RAINIER, WA
- Really Easy
- Less than 15 mins
Gently pressed the lower two clips onto my thumbs as I pressed the skirt into the cooktop skirt hole. Be gentle or you can break the new skirt!
Was this helpful?
Thank you for voting!
the little tabs that hold the skirt in the hole break off
2 of 3 people
found this instruction helpful.
-
John from Sequim, WA
- Really Easy
- Less than 15 mins
I pulled the knobs off, lifted the broken skirts out and snapped the new ones in.
Was this helpful?
Thank you for voting!
broken burner control knob
1 person
found this instruction helpful.
-
marcus from CARSON, CA
- Really Easy
- Less than 15 mins
pull old knob off install new knob
Was this helpful?
Thank you for voting!
backing for stovetop knobs
1 of 2 people
found this instruction helpful.
-
Norman from Tustin, CA
- Really Easy
- Less than 15 mins
the decorative backings on our stovetop knobs had become frayed, and I simply pried off the old ones,and installed the new ones. I have use Parts Select for years for various parts replacement, their service is quick and accurate. When I need a part, I always check here first.
Was this helpful?
Thank you for voting!
Control Knob Was Broke Due To Old Age
-
jayanti from w.bloomfield, MI
- Really Easy
- Less than 15 mins
Just replaced with the same color-almond
Was this helpful?
Thank you for voting!
Old skirts tabs broke off with age
-
Leanne from Huntingtown, MD
- Really Easy
- Less than 15 mins
Just replaced them.
Was this helpful?
Thank you for voting!