My Orders
- Home
- KGCS166GSS07
- Instructions
KGCS166GSS07 KitchenAid Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
the knob was melted by a hot pan
21 of 25 people
found this instruction helpful.
-
David from Corinth, TX
- Really Easy
- Less than 15 mins
popped off the old knobs and put on the new ones in less than a minute
Was this helpful?
Thank you for voting!
I had a faulty wiring on the igniter switches.
12 of 18 people
found this instruction helpful.
-
Raymundo from Cerritos, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
replaced the set of igniter switches I order from Partselect .com.
Was this helpful?
Thank you for voting!
Had melted knob on cooktop
2 of 3 people
found this instruction helpful.
-
Traci from Bozeman, MT
- Easy
- Less than 15 mins
Went great, part was perfect!
Was this helpful?
Thank you for voting!
Original burner grates had deteriorated and two side burner grates and the center grates were replaced.
1 person
found this instruction helpful.
-
Philip from CHANDLER, AZ
- Very Easy
- Less than 15 mins
The burner grates for the KitchenAid range are no longer available from KitchenAid. Other burner grates available in PartSelect were a like-kind fit. Installation was easy--just replace the burner grates.
Was this helpful?
Thank you for voting!
Burner knob appeared to have been accidentally melted by placing a hot pot on top of it.
1 of 2 people
found this instruction helpful.
-
Jodie from Carlsbad, CA
- Really Easy
- Less than 15 mins
I took the melted knob off, located the part # went online and found this site. I immediately found the correct burner knob, ordered it, and it came very quickly to my home! I just popped it right on the cooktop, and it's as good as new.
Was this helpful?
Thank you for voting!
Burner knobs needed replacing due to hot pan melting them
0 of 1 people
found this instruction helpful.
-
Marvin from Georgetown, TX
- Really Easy
- Less than 15 mins
Simiply pulled the old burner knob off and replaced them with the new knobs.
Was this helpful?
Thank you for voting!
control knob was melted from a hot pan
1 of 4 people
found this instruction helpful.
-
JUDY from AIKEN, SC
- Really Easy
- Less than 15 mins
Easy as 1 2 3. Removed ruined knob and set new knob on post. That's it. Complete success!
Was this helpful?
Thank you for voting!
change over from Natural Gas to LP and install cooktop from Electric to gas
-
Dan from Olalla, WA
- Really Easy
- Less than 15 mins
-
Socket set
removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.
Was this helpful?
Thank you for voting!