My Orders
KGCK KitchenAid Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
burners would not lite, no spark
-
doug from ramsey, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
pull out the stove,took the top back panel off, take off wires one at a time on new spark module.. easy
Was this helpful?
Thank you for voting!
Missing regulator when floor model gas cooktop was purchased
-
Jerald from Loveland, OH
- Easy
- 1- 2 hours
-
Wrench (Adjustable), Wrench set
1. Apply gas pipe joint sealer to treaded nipple on bottom of cooktop; 2. Install regulator on nipple with regulator direction arrow pointing to top of cooktop; 3. Tighten but do not overtighten as it may crack the aluminum body regulator; 4. Make sure the face of the regulator with the green painted surface faces the outside of the cabin
... Read more
et; 5. Get a new gas flex hose to connect to gas pipe (got mine at Lowe's - 2 feet long with all the right fittings for about $15). 6. Follow instructions on gas flex hose - make sure you use gas pipe joint sealer only where indicated; 7. Turn gas shutoff valve back on and test for leaks using soapy water; 8. Turn on each cooktop burner to bleed out air.
Read less
Was this helpful?
Thank you for voting!
no spark on surface of gas stove
-
Charles from Saint Charles, IL
- Very Difficult
- More than 2 hours
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
repair failed; after much difficulty in accessing the small bolts that hold the 'spark igniters' in place; rear two were more accessible, front two proved impossible. Next step, invest in a new slide-in stove. The repair was a dad guess on my part; although designers often consider repair as a non-option, -sad but true.
Was this helpful?
Thank you for voting!