My Orders
- Home
- KGCC505HWH2
- Instructions
KGCC505HWH2 KitchenAid Cooktop - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
control knob was melted from a hot pan
1 of 4 people
found this instruction helpful.
-
JUDY from AIKEN, SC
- Really Easy
- Less than 15 mins
Easy as 1 2 3. Removed ruined knob and set new knob on post. That's it. Complete success!
Was this helpful?
Thank you for voting!
lost gas top knobs
-
Bonnie from Collegeville, PA
- Really Easy
- Less than 15 mins
just put them on and pressed down
Was this helpful?
Thank you for voting!
no spark on stove top (gas)
-
larry from Boulder city, NE
- Really Easy
- Less than 15 mins
-
Nutdriver
Repair was super simple . Any one could have done it.
Was this helpful?
Thank you for voting!
Old skirts tabs broke off with age
-
Leanne from Huntingtown, MD
- Really Easy
- Less than 15 mins
Just replaced them.
Was this helpful?
Thank you for voting!
change over from Natural Gas to LP and install cooktop from Electric to gas
-
Dan from Olalla, WA
- Really Easy
- Less than 15 mins
-
Socket set
removed old electric cooktop and install gas line and gas cooktop and change from natural gas to LP remove and replace orifice with new ones from kit, my cooktop called for 2 black orifices in the two small burners but did not come in the parts kit that I orded so I used 2 red orifices and it seems to work just fine.
Was this helpful?
Thank you for voting!
burners would not lite, no spark
-
doug from ramsey, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
pull out the stove,took the top back panel off, take off wires one at a time on new spark module.. easy
Was this helpful?
Thank you for voting!
Worn out spring assembly in valve.
-
Stephen from Ladera Ranch, CA
- Easy
- 15 - 30 mins
-
Screw drivers, Socket set, Wrench set
This was remove and replace of burner valve on a rangetop stove. Removed front pannel of stove. Removed lower panel support. Removed ignition/spark material/peice (slides right off). Unscrewed valve form underneath through access hole, and unscrewed gas connection on top. Removed and eplaced with new valve and reassembled everything in or
... Read more
der. Fairly straight forward.
Read less
Was this helpful?
Thank you for voting!