KFP740WH3 KitchenAid Food Processor - Instructions

The old one broke. I ordered a new one and put it on the food processor. Bingo! Back in business.

The site was easy to navigate. I quickly found the part that I needed to replace, ordered it, and it was here in just a few days and I was able to use my Kitchenaid Food processor again. I will definately use this site again for any appliance parts I need. Much less expensive than replacing small appliances!

New bowl arrived. Matched model number as described. Put new bowl on base, slid it into position, safety switched engaged and food processor worked. Simple easy, quick.

Just replacement for cracked bowl.

Bought a new bowl from PartSelect. It came practically overnight, placed it on the base and it works perfectly.

just put it on the shaft adapter

I needed to replace the entire bowl. There was no repair.

installed attachment as needed

I put the new work bowl on the machine

I ordered a replacement work bowl and now my food processor works again!

I ordered a new large bowl from Partselect and replaced the broken bowl. The bowl fit perfectly and works very well. I also replaced a broken extension stem with a replacement stem from Partselect, and that worked well for about week, then it too also broke the same way the original did. Perhaps the item was just not meant to handle sh ... Read more redding cheese.

I used 3, 3/4" x 2" x 4" blocks of wood (to protect the motor housing) and a carpenters 6" pry bar to remove the broken blade and the shaft sleeve from the shaft; 1st one side then the other side until the damaged sleeve was off. Cleaned the shaft with steel wool , vacuumed out the steel wool and applied a coating of light oil on the sha ... Read more ft. Using a rubber mallet I gently tapped the sleeve in to place. The new blade then just dropped into place.