EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KFDC506JSS01 Whirlpool Range - Instructions

All Instructions for the KFDC506JSS01
16 - 21 of 21

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
terminal block back of range shorted and burned
  • Louis from Grantsville, UT
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
EASY!! Repairs saved $300.00 on serviceman fees they will rip you off for this simple repare
Was this helpful?
Thank you for voting!
Power block terminal failure
  • Leonard from Brazoria, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Ordered part needed. Much, much cheaper than purching a new range.
Was this helpful?
Thank you for voting!
Wiring Block shorted due to moisture and Stove had no Power
  • John from Roberts, MT
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
This was very straight forward. Once the sheet metal shroud on the back side was removed just had to undo the one remaining wire, remove the block, and reassemble. Only question I had was which wires went where. The Wiring Block was melted due to the short and the wires were no longer attached. Did a quick google for a typical oven three- wire install and that did the trick.
Was this helpful?
Thank you for voting!
terminal block cracked
  • James from Richmond, VA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Pliers
Followed the easy instruction sheet provided.
Was this helpful?
Thank you for voting!
The Terminel Bloc Overheated And The Bloc Melted Causing The Stove To Cease Fukshioning
  • Joseph from Channelview, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
R&r
Was this helpful?
Thank you for voting!
Melted and fused together wires due to non-grounding of terminal block
  • Dr PauMari from Alamogordo, NM
  • Really Easy
  • 1- 2 hours
  • Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
We called a dear handyman church member with years of repair service to his home, personal vehicles and general maintenance of our little church and parsonage. Known for his trade as an engineer with over 50 years in the industry wearing white shirts and working in an office; however, he is not afraid to get his hand dirty. We all worked together (my husband, daughter and me) to troubleshoot and resolve the problem and the terminal block purchased from "parts select" was just the answer to all our problems and worries. The range is fully operational and works like new. Thanks.
Was this helpful?
Thank you for voting!
All Instructions for the KFDC506JSS01
16 - 21 of 21