All Installation Instructions for KitchenAid Range KESS907SWW06

Not Heating

Gayle from Shelby, AL
Easy
15 - 30 mins
Pliers, Screw drivers

Removed wall oven from wall. Removed back cover. Unscrewed thermastat and removed old thermastat. Screwed in new thermastat and put back together.

Was this helpful?

I had a power serge and it burned the Plug at the termial block and melted a few wire.

Robin from Vanderbilt, PA
Really Easy
15 - 30 mins
Socket set

After we got the part in the mail my husband put it on and shortened the wires and put new plugs on the ends of the wires and we had to get a new plug put it on and it was fixed.

Was this helpful?

When removing the warming drawer I did not read the instructions and broke the slide for the drawer. I removed the drawer without pressing the tabs which broke the right slide.

Deborah from Ashburn, VA
Really Easy
15 - 30 mins
Screw drivers

I removed the broken slide by removing 1 screw on the front slide and the back of the slide came out of the slot in the very back (no screws). I fitted the back of the slide into the slot and then replaced the screw on the front of slide. Extended the slides then I pressed the tabs on the drawer and replaced in onto the slides (left an ... Read more

Read less

Was this helpful?

While trying to tighten the oven door handle, the outside glass shattered.

Rick from Spring, TX
Really Easy
Less than 15 mins
Screw drivers

I was not able to order just the glass, so I ordered the exterior door assembly. The door assembly is held in place by 5screws. 2 on top, 3 along the bottom. A very easy project!

Was this helpful?

worn out hinges

Kenneth from West Orange, NJ
Difficult
More than 2 hours
Nutdriver, Pliers, Screw drivers, Wrench set

Tried reusing old door hinges after removing door to access temp sensor and broke the oven glass twice.with new hinges , new glass went in easily.

Was this helpful?

KESS907SWW06 KitchenAid Range - Instructions