KESO KitchenAid Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Lint filter starting to develop holes
1 of 2 people
found this instruction helpful.
-
Jacqueline from South San Francisco, CA
- Really Easy
- Less than 15 mins
Checked on-line for part and ordered it. Replaced filter with new one.
Was this helpful?
Thank you for voting!
The screen in the old, original filter had a hole in it...
1 of 2 people
found this instruction helpful.
-
Patricia from North Bend, WA
- Really Easy
- Less than 15 mins
Took the old filter out, put the new filter in...bingo! Repaired
Was this helpful?
Thank you for voting!
Filter was broken
0 of 1 people
found this instruction helpful.
-
Roger from North Haven, CT
- Really Easy
- Less than 15 mins
Part Fit fine thank you
Was this helpful?
Thank you for voting!
old filter screen frame was cracked
0 of 1 people
found this instruction helpful.
-
Angelo from Staten Island, NY
- Really Easy
- Less than 15 mins
Simply removed old one and replaced with new one
Was this helpful?
Thank you for voting!
Torn Lint Filter
0 of 1 people
found this instruction helpful.
-
Meagan from Ridgeland, MS
- Really Easy
- Less than 15 mins
My lint filter was torn up, and ordering a new one was really easy... I ordered, got it in very quickly, replaced it and continued on!
Was this helpful?
Thank you for voting!
old lint filter was torn
0 of 1 people
found this instruction helpful.
-
Jane from Monument Beach, MA
- Really Easy
- Less than 15 mins
Ordered replacement lint filter. Took out the old one, and put in the new one. Voila! Very easy!!!
Was this helpful?
Thank you for voting!
old filter was broken
0 of 1 people
found this instruction helpful.
-
louis from wetumpka, AL
- Really Easy
- Less than 15 mins
jst droped the new filter in
Was this helpful?
Thank you for voting!
just a filter
0 of 1 people
found this instruction helpful.
-
john from pahrump, NV
- Really Easy
- Less than 15 mins
i love your look up site. it is great. it is so easy to fine a part, pictures and all part numbers.
great job.
great job.
Was this helpful?
Thank you for voting!
lint filter had a small hole
0 of 1 people
found this instruction helpful.
-
Joel from Bradenton, FL
- Really Easy
- Less than 15 mins
I pulled the old lint filter out and put the new one in
Was this helpful?
Thank you for voting!
lint was blowing outside through the vent hose
0 of 1 people
found this instruction helpful.
-
Dewayne from Waynesville, NC
- Really Easy
- Less than 15 mins
no-brainer, just took the other filter out and replaced it with the new one. perfect fit, and now there is no more lint blowing outside. the part arrived in only 3 or 4 days and was exactly like original, thanks to your web-site
Was this helpful?
Thank you for voting!
Lint trap had a tear - needed a replacement
0 of 1 people
found this instruction helpful.
-
Theodore from Grove City, OH
- Really Easy
- Less than 15 mins
Went online to find the lint trap for an older Maytag dryer - found one at Sear's Parts for $ 30.70 - then found the exact same part at PartsSelect for $ 9.00. Ordered from PartsSelect, received the replacement in just a couple of days and it works perfectly.
Very happy with over all service.
Very happy with over all service.
Was this helpful?
Thank you for voting!
Lint filter broke
0 of 2 people
found this instruction helpful.
-
Annette from Harrisburg, PA
- Really Easy
- Less than 15 mins
Our lint catcher broke at the top and was not allowing the front loading door to close. It could not have been the best use of efficiency either! I went online and found your site and ordered the part I needed. Most impressive, was that I received this small part within 2 days! Not sure why I waited so long to order the part - I could
... Read more
have saved myself a lot of aggrevation long ago. Thank you for your quick service!!!
Read less
Was this helpful?
Thank you for voting!
Lint filter has hole in it
-
John from Cairo, OH
- Really Easy
- Less than 15 mins
I ordered a placement lint filter because the one had a hole in it allowing some of the lint to go thru it. This was the original one, so it has lasted a long time. I am hoping that the new filter will last now until the dryer gives out.The dryer was bought in 1996. Thanks Parts Select for the great service in sending me the new on and ha
... Read more
ving one in stock. Thanks so much.
Read less
Was this helpful?
Thank you for voting!
old filter falling apart with big holes
-
Stephen from Orinda, CA
- Really Easy
- Less than 15 mins
Replacing the old with new filter took about 5 seconds. The best part of this story was the shipping. I ordered the filter and to my surprise it arrived the next day from clear across the country. Best service from a supplier I've had in a long time. Will definitly call PartSelect the next time I need to repair something. Thank you.
Was this helpful?
Thank you for voting!
My lint filter had a hole in it and needed to be replaced.
-
Nancy from Solon, OH
- Really Easy
- Less than 15 mins
I only had to put in the new filter. I was extremely impressed with the exception service and the speed in which the part arrived.
Was this helpful?
Thank you for voting!