EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KEMC377 KitchenAid Microwave Oven Combo - Instructions

All Instructions for the KEMC377
121 - 135 of 168

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
I cracked the interior glass door by dropping a dish on it.
  • Raymond from WESTVILLE, IN
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Removing the door was the first challenge but once the door was off it was a matter of disassembling the door to get access to the interior door. If you remove all pieces and line them up in the order that they are removed you have a good chance for success.
Was this helpful?
Thank you for voting!
Two Bulbs Burned Out
  • Joel from New Braunfels, TX
  • Difficult
  • 30 - 60 mins
Took off the covers and replaced the little bulbs. Took a long time to figure out how to get the covers off. Bulbs were $26 apiece!
Was this helpful?
Thank you for voting!
range installer broke a screw off & busted the plastic piece
  • Christina from West Des Moines, IA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Had to screw off old terminal block & screw on new one
Was this helpful?
Thank you for voting!
oven would not heat up in bake or broil
  • Tom from Fallston, MD
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Removed oven from the wall. Take off back panel. Removed thermal overload thermostat. Replaced with new part and works great.
Was this helpful?
Thank you for voting!
One of the panes of glass (closest to oven) shattered
  • brenda from scottsdale, AZ
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
First, I'll say this website made it easy to find and order the part, it arrived quickly and reading others' reviews helped with installation. My Dad and I did the repair together, which really helped - my Dad is an fantastic handyman! We removed the door by lifting it up out of the hinges - a little difficult to get the right angle, but we succeeded with a little wiggling. We disassembled each later of glass/door, keeping each layer in order with screws so we could retrace our steps. I cleaned each layer thoroughly, which added to the time. Unfortunately, just as we were putting the last part on (exterior door with glass), the glass shattered as I tightened the screw! Ack! My Dad said it's because the glass was old and easy to shatter. Maybe I tightened the screw too much? So, back to the website I go to order the next part. We expect it to arrive soon. The bad news: another Christmas without an oven. The good news: my oven is now clean as new (I even removed the back fan cover to clean the fan - couldn't have done that without removing the door) and the parts added up to a fraction of the cost of a new oven.
Was this helpful?
Thank you for voting!
The exterior glass shattered on our oven, so had to replace entire exterior door
  • brenda from scottsdale, AZ
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers, Wrench (Adjustable)
Second time we've ordered from partselect.com and we're very pleased with their service!! Replaced interior glass and as we were doing so, the exterior glass shattered - apparently from age. So ordered the next part; it arrived quickly and well packed and somewhat reasonably priced. All was easy re-assembling the door in all it's layer s until it came down to putting the door back on. The springloaded hinges are tough! We found some directions that really helped us. Then it took about 1/2 minute and we're done!
Was this helpful?
Thank you for voting!
circuit breaker blew
  • Richard from Sarasota, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in abo ut 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
Was this helpful?
Thank you for voting!
No heat after self clean
  • Charlene from Ada, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Killed the power to oven, removed oven from its enclosure (its heavy), removed back off oven and the part that needed to be replaced was right there. After that simply reverse the procedure. Honestly hardest part of whole job was remembering what i did with the screwdriver after my last home repair job. The oven is heavy you may need help .
Was this helpful?
Thank you for voting!
Replaced broken glass cooking tray
  • Lyn from Sonoma, CA
  • Really Easy
  • Less than 15 mins
I took the new try out of the box and placed it on the turntable and I was DONE! Took about 10 seconds. The delivery was speedy as promised. I will definitely order from this company again for replacement parts.Very good customer service and communication.
Was this helpful?
Thank you for voting!
I chipped the edge of the glass cooking tray.
  • Paula from Warren, OR
  • Really Easy
  • Less than 15 mins
Ordered a new cooking tray and it was shipped within two hours. Packaging was excellent and well protected.
Was this helpful?
Thank you for voting!
I broke the glass tray in the microwave.
  • John from Pittsburgh, PA
  • Really Easy
  • Less than 15 mins
I ordered it from PartSelect one evening and had the replacement glass one day later. It was the quickest service I have ever experienced. Now, I can continue to use my microwave. Thanks for such great & timely service.
Was this helpful?
Thank you for voting!
Chipped glass serving tray in microwave
  • William from Dunn Loring, VA
  • Really Easy
  • Less than 15 mins
Lifted out the chipped one, inserted the new one. Pretty simple.
Was this helpful?
Thank you for voting!
control panel quit working, ovens would not operate
  • Don from Davenport, WA
  • Really Easy
  • Less than 15 mins
Contacted repair person on line and explained the problem. Person suggested testing the thermal fuse. Checked for continuity and there was none indicating the fuse was blown. Ordered new part and installed. Everything working again. Only problem was that the new part did not have the same connection as the old one on one end. Made s ubstitution and it worked.
Was this helpful?
Thank you for voting!
Oven not heating
  • Ira from Manchaca, TX
  • Really Easy
  • Less than 15 mins
  • Pliers, Screw drivers
Have a Whirlpool Accubake self cleaning wall oven that quit working after doing a cleaning. Found that the thermal overload safety thermostat might be the problem. Ordered the part which arrived in a couple of days. Installation was very easy and took about 10 minutes. First turn off power to the oven. Slide the oven out, remove the back panel, remove the old safety thermostat which has two wires coming off of it, and replace it with the new one. Put the back panel on and slid the oven back in. Turned the power to the oven back on and we had heat. Problem solved.
Was this helpful?
Thank you for voting!
I broke my microwave glass tray
  • Lisa from Happy Valley, OR
  • Really Easy
  • Less than 15 mins
Honestly, I was afraid to order from this website, but after reviews, I placed my order, and 2-3 days later, my glass tray was replaced in my Microwave! I was freaking out because you just cant go back to Sears or Standard Brands and get a new one...everything is on-line. Im VERY happy.
Was this helpful?
Thank you for voting!
All Instructions for the KEMC377
121 - 135 of 168