EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KEHC309JWH3 KitchenAid Microwave Oven Combo - Instructions

All Instructions for the KEHC309JWH3
91 - 105 of 217

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replacement of inner glass
2 of 4 people found this instruction helpful.
  • Mark from Kingsport, TN
  • Easy
  • 30 - 60 mins
  • Screw drivers
Opened overn door and inserted allen wrenchs through the holes in the door hinges. Close the door until it makes contact with the allen wrenchs, then grasp the oven door handle and the bottom of the oven door and lift up to remove the door. Place the door on a flat surface,(I used a bed) and remove the screws to gain access to the glass. Upon re-assesbly, leave door flat line up and re-install all screws before putting the front pannel back on. Insert door back into the oven and open, remove the allen wrenches and close the door. The process is easy and will take 30 minutes to an hour and save you a $100.00 service call!
Was this helpful?
Thank you for voting!
I broke the glass cooking tray when instaling my oven microwave combo
2 of 4 people found this instruction helpful.
  • Jeff from Baytown, TX
  • Really Easy
  • Less than 15 mins
I put the tray in the microwave???? Pretty easy.
Was this helpful?
Thank you for voting!
Missing turntable
1 person found this instruction helpful.
  • Kristen from Yorba Linda, CA
  • Very Easy
  • Less than 15 mins
Ordered the part and was extremely pleased with how quickly it shipped and also the packaging was extremely secure. Will definitely purchase from this site again.
Was this helpful?
Thank you for voting!
Replace turntable motor
1 person found this instruction helpful.
  • Monty from Mansfield, TX
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
removed perimeter screws from the bottom side and the lower cover is hinged at the wall side. Motor is visible and easily removed with two screws. Take of the old one, install the new one, and reverse the procedure to put the bottom cover back in place. Will nee helper to hold one side of the bottom until couple of screws can be put in on the other side.
Was this helpful?
Thank you for voting!
R&R broken inner door glass and insulation.
2 of 4 people found this instruction helpful.
  • Gary from PRESCOTT, AZ
  • Easy
  • 30 - 60 mins
  • Screw drivers
Since there is multiple glass panels with several brackets, screws and insulation within the oven door I strongly suggest to take photos at each step using your smart phone. Do not attempt to remove all the components at once. Bracket positions, screw locations and glass orientation is necessary. This is the best advice I have to make thi s a quick and very easy job.
Was this helpful?
Thank you for voting!
Cracked in oven door glass
2 of 5 people found this instruction helpful.
  • Alan from Prairieville, LA
  • Easy
  • 30 - 60 mins
  • Nutdriver, Screw drivers
Read the instructions in installation manual to remove door. Kept removing screws. Was surprised to find two panes of glass between the inner glass and the outer glass. Cleaned all the glass (4) and the inside of the door. Looks brand new. Be careful with the insulation; be sure it is pushed back or it will show from the outside.
Was this helpful?
Thank you for voting!
Turntable did not work
1 of 2 people found this instruction helpful.
  • Eldon from ORANGE, CA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Ordered a new motor. Removed the outside trim of the oven-microwave combo. 2 screws at the bottom of the trim. Removed the screws that held the combination micro and oven unit in place. Removed the top and bottom black plastic grill of the microwave. 3 screws each. Pulled the entire unit out about 1 inch exposing the screws at each side of the microwave that hold it in place.
Snapped off the top control panel which exposed the wiring connecting the control panel.
Unplugged a couple of wire harness units to free the control panel.
Be sure to label the units to know which goes where during reassembly.
Remove the microwave unit from the housing and place it on its side.
Remove the metal plate that houses the motor. 4 screws hold the motor in place. Disconnect the 2 wires from the old motor and you are ready to install the new motor. Be sure to TURN OFF THE POWER to the unit at the breaker box and remove the turntable from inside the microwave.
Was this helpful?
Thank you for voting!
Right side Door Spring broke.
2 of 5 people found this instruction helpful.
  • Joseph R from East Falmouth, MA
  • Easy
  • 30 - 60 mins
  • Screw drivers
Removed door to see what happened to the spring, ordered new spring and door frame on line and replaced parts. Had to replace door frame as it broke while removing it.
Was this helpful?
Thank you for voting!
I snapped a bolt on the main power terminal block when connecting the pigtail.
3 of 8 people found this instruction helpful.
  • Frank from Palm Coast, FL
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Removed the small metal panel covering the main power terminal in back of the electric range. Removed the nuts holding the red, white and black electrical wires from the range using the appropriate socket (there will be two nuts on each bolt end). Removed the two screws holding the main power terminal block with appropriate screw driver. Connect the new main power terminal block to the range using the two screws. Reconnect the red, black and white electrical wires coming from the range using one nut for each wire. IMPORTANT: do no over tighten the nuts because the bolts could snap. Reconnect the pigtail and secure the small metal panel covering the main power panel.
Was this helpful?
Thank you for voting!
broken inside glass
1 of 2 people found this instruction helpful.
  • Rene from Keller, TX
  • Easy
  • 15 - 30 mins
  • Screw drivers
unscrewed the oven door, took off the entire door, pulled apart the glass pieces and replaced
Was this helpful?
Thank you for voting!
broiler pan missing
1 of 2 people found this instruction helpful.
  • RAYMOND from JACKSONVILLE, FL
  • Really Easy
  • Less than 15 mins
ordered new broiler pan
Was this helpful?
Thank you for voting!
glass tray missing
1 of 2 people found this instruction helpful.
  • Carol from Phoenix, AZ
  • Really Easy
  • Less than 15 mins
found the part no. and ordered it. it was delivered fast and efficient.
tracking was also helpful.
thanks
Was this helpful?
Thank you for voting!
broken glass dish for microwave
1 of 2 people found this instruction helpful.
  • Janet from Concord, CA
  • Really Easy
  • Less than 15 mins
no repair needed - ordered part, came within 3 days - very satisfied
Was this helpful?
Thank you for voting!
Old microwave glass tray shattered while warming a hard-boiled egg.
1 of 2 people found this instruction helpful.
  • Raymond from HINSDALE, IL
  • Very Easy
  • Less than 15 mins
I took the new tray out of the box and placed it in the microwave oven.. No tools needed.
Was this helpful?
Thank you for voting!
Broken cooking tray
1 of 2 people found this instruction helpful.
  • David from Oxnard, CA
  • Really Easy
  • Less than 15 mins
Replaced the glass tray
Was this helpful?
Thank you for voting!
All Instructions for the KEHC309JWH3
91 - 105 of 217