Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
While removing burned out light bulb, the glass cover fell to the floor of the oven and broke!!
5 of 7 peoplefound this instruction helpful.
Phyllis from GAINESVILLE, GA
Easy
Less than 15 mins
Husband very ill in bed. It's up to me!! Got a new bulb at HomeDepot and figured out how to get that wire 'thing' back in and the new glass cover installed. I DID IT!! WOW! My husband has always done these jobs around the house.......but now it's up to me.......and I'm not so dumb after all! I DID IT!! Now everyone who comes in
... Read morethe house.....I show them what I DID!! :-)
Read less
Was this helpful?
Thank you for voting!
Broken door glide
4 of 5 peoplefound this instruction helpful.
Michael from Signal Hill, CA
Really Easy
Less than 15 mins
snapped the new piece of plastic in its place and ta da, its fixed.
The replacement racks were spot on and the service was outstanding. had the racks in 2 days. Happy Happy Joy Joy! :)
Was this helpful?
Thank you for voting!
Old racks had melted plastic on them.
4 of 5 peoplefound this instruction helpful.
James from PAINESVILLE, OH
Very Easy
Less than 15 mins
It was a replace racks not repair. No problem
Was this helpful?
Thank you for voting!
Repaired Oven Range Light Bulb
3 of 3 peoplefound this instruction helpful.
Alan from SAN MATEO, CA
Very Easy
Less than 15 mins
Screw drivers
The bulb has a plastic clear cover. That cover can just be carefully removed using a screwdriver. It's held in by a metal bracket. After you remove the cover. You'll just need to replace the bulb and then re-install the cover and bracket.
Was this helpful?
Thank you for voting!
Drawer Glide Was Broken
3 of 3 peoplefound this instruction helpful.
Karen from Yuma, AZ
Very Easy
Less than 15 mins
Took the drawer out, snapped the new glide in place, and replaced the drawer. Installation was simple with no tools required.
Was this helpful?
Thank you for voting!
Cooktop burner was wore out from age
3 of 3 peoplefound this instruction helpful.
John from HAYDEN, AL
Very Easy
Less than 15 mins
Just pulled the old cook top burner out and put the new one in .it took about 1 1/2 minutes
Was this helpful?
Thank you for voting!
Right rear burner not working properly
3 of 3 peoplefound this instruction helpful.
Dante from SOUTHOLD, NY
Difficult
30 - 60 mins
Nutdriver, Pliers, Screw drivers
After a brief discussion with CS about the electric stove part was shipped it arrived and I proceeded to install I found it needed to be installed sideways not up & down like the old one. The terminals did not line up so I put the black lead first and the purple lead last in doing that I burned out the switch??? was not easy to install as
... Read more the video showed his switch matched each wire? My installation was sideways??
Read less
Was this helpful?
Thank you for voting!
my burners would just heat up solid red even when i had controls turned down to 2 or 3. i would have to turn controls off and back on, then they still would just go back to glowing red
3 of 3 peoplefound this instruction helpful.
Leota from AUXVASSE, MO
Really Easy
30 - 60 mins
Nutdriver, Pliers, Screw drivers
This was my first time ever working with electrical issues. My husband is not physically able to do repairs now. Very easy fix. Just viewed video repair instructions and it went exactly as instructed. Within 45 minutes, I had my stove repaired and cleaned and back in working order!! Great results. My range is working perfectly again and M
... Read moreama is happy!!
It went easy, I ordered the part from another vendor, received it in 3 days and it only took about 20 minutes to install. I do not recommend ordering from PartSelect!
Was this helpful?
Thank you for voting!
Bottom element burned up
3 of 3 peoplefound this instruction helpful.
Peggy from PORTLAND, OR
Easy
30 - 60 mins
Pliers, Screw drivers
I am 78 years old and I watched the how to video twice and then did it so if I can do it anyone can,oh and I am a woman
Was this helpful?
Thank you for voting!
Broiler broke apart in pieces. Also we found an round honeycomb part
3 of 4 peoplefound this instruction helpful.
Betty from KNIGHTDALE, NC
Really Easy
30 - 60 mins
in the bottom of the oven when I was looking to see what was going on. My husband did the repair just as the video described. I suspect this part honeycomb round maybe ceramic piece goes over where the heat is vented from the oven. Where do I get another one of these and how does it attach in the oven-under t
... Read morehe burner. HELP I tried to look on the schematics and did not see anything. The repair went fine, except when we turned everything back on it did not work. Then my husband remembered he forgot to plug the new part IN. Once plugged in it is working fine. Thanks
Read less
Was this helpful?
Thank you for voting!
Lens cover for the oven light
3 of 4 peoplefound this instruction helpful.
Larry from COZAD, NE
Really Easy
30 - 60 mins
Very easy just had to pull the wire up that holds it secure.
Was this helpful?
Thank you for voting!
Burner switch work sometime.
3 of 4 peoplefound this instruction helpful.
junius from WICOMICO, VA
Really Easy
1- 2 hours
Nutdriver
I follow the video on your site
Was this helpful?
Thank you for voting!
Change on e of the inside glass
4 of 7 peoplefound this instruction helpful.
Ronald from Ozone Park, NY
Easy
1- 2 hours
Screw drivers
removed the screws holding the front part of the door and from there worked my way, untill the third glass. It took a couple hours, my first time,. Overall easy,
My Orders
