EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

KEBC24 KitchenAid Wall Oven - Instructions

All Instructions for the KEBC24
61 - 75 of 99

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Missing Retainer and screw
4 of 13 people found this instruction helpful.
  • Jan from Edmond, OK
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Simple - Removed oven door attached retainer with screw.Re attached door.

Whirlpool wanted three time the cost of the same parts The only shipping option was Fedex Overnight which was very costly.

Your prices are great "Parts Select".

Jan
Was this helpful?
Thank you for voting!
Block broke
1 of 4 people found this instruction helpful.
  • Edward from Crimora, VA
  • Really Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
Unplug power cord, remove wires from block. take 2 screws out. replace with new block about 15 mins. Done
Was this helpful?
Thank you for voting!
The oven shipped without a temperature probe.
0 of 2 people found this instruction helpful.
  • jerry from rochester, NY
  • Really Easy
  • Less than 15 mins
Unwrapped the package, plugged the probe into the oven, stuck the other end into the chicken.
Was this helpful?
Thank you for voting!
air circulation fan assembly
2 of 11 people found this instruction helpful.
  • JOHN from CANTON, OH
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
Remove oven from wall, remove top and back covers.Remove old fan assembly. The new assembly fit right in and works great.
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people found this instruction helpful.
  • Howard from Boynton Beach, FL
  • Easy
  • 30 - 60 mins
  • Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol oring refer handles. Thank you
Was this helpful?
Thank you for voting!
Blower very loud noise, all the time.
  • william from Wellington, FL
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Removed double oven from cabinet after removing the doors, placing it on a milk crate, needs two people, turned it slightly to access the rear panels, removed panels and lower of the 2 motors and installed new motor, replaced all panels. I now have to check to make sure it is turned on it is so quiet! We lived with this noise so long beca use the appliance repair people said it was very expensive, about $400.00 to replace the motor, we did it for under $100.00 !!
Was this helpful?
Thank you for voting!
Upper oven self-clean cycle blew out digital keypad
  • William from Wilmington, DE
  • Easy
  • 15 - 30 mins
  • Screw drivers
Getting to the wiring harness behind keypad discovered a blown in line thermal fuse. Replaced and turned the main breaker back on. Clock & controls back on.
Was this helpful?
Thank you for voting!
Inner Glass Was Broken
  • Jane A. from Lake Forest, IL
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers
I followed the instructions for installation on your site. I encountered two problems. I was unable to unscrew several screws. I had to used wd40 and slight encouragement from a soft hammer. Also, I was glad for the advice in one instruction about paying attention to the type of screw (flat or more flat). Otherwise, when I was ready to put everything back together, I would have had some problems. The flatter screws definitely had to be used in certain areas.
Was this helpful?
Thank you for voting!
Two Bulbs Burned Out
  • Joel from New Braunfels, TX
  • Difficult
  • 30 - 60 mins
Took off the covers and replaced the little bulbs. Took a long time to figure out how to get the covers off. Bulbs were $26 apiece!
Was this helpful?
Thank you for voting!
Cracked inner door glass
  • Mark from Ocean, NJ
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
A generic video on Youtube was actually very helpful as it showed how to remove the door from the oven for easier glass replacement. The only tricky part is getting the panes of glass in the correct order during reassembly,as there are actually 4 pieces in the door. Only the piece that faces the oven's interior was cracked on mine. The tw o inner pieces between the two outermost pieces are the ones not to mix up. This little repair also gave me the opportunity to thoroughly clean all 4 pieces of glass that had become rather dirty over 12 years. Now the oven door looks like new!
Was this helpful?
Thank you for voting!
replace thermo fuse
  • mike from king city, OR
  • Easy
  • 30 - 60 mins
  • Screw drivers
turned breaker switch off. unscrewed the oven from the cabinet. lifted the oven out of the cabinet (heavy & awkward, needed an extra pair of hands). removed back panel. replaced fuse. reassembled everything. this is the second time i've had to replace the thermo fuse (oven blows the fuse when set to clean). first time i replaced the fuse it took about two hours. second time it about an hour.
Was this helpful?
Thank you for voting!
broken glass
  • Arleen from North Haven, CT
  • Easy
  • 30 - 60 mins
  • Screw drivers
followed the brief instuctions you provided easy as pie
Was this helpful?
Thank you for voting!
range installer broke a screw off & busted the plastic piece
  • Christina from West Des Moines, IA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers
Had to screw off old terminal block & screw on new one
Was this helpful?
Thank you for voting!
Door Gasket was stained and dirty
  • Kenneth from Englewood, CO
  • Really Easy
  • Less than 15 mins
  • Screw drivers
Removed with screw driver the gasket clamp at bottom of door opening and then pulled away the old gasket. Installed new gasket making sure that each holding pin was insert in mounting holes, trimmed away un-raveled gasket material at ends and reinstalled gasket clamp at bottom of door. Removed old oven racks and installed new racks.
Was this helpful?
Thank you for voting!
circuit breaker blew
  • Richard from Sarasota, FL
  • Easy
  • Less than 15 mins
  • Pliers, Screw drivers
I went to the source of power on the stove and noticed one of the terminals had come loose from the terminal block and had shorted out against the cover of the terminal junction. After prying the loose terminal off cover I ordered new terminal block and received it the 2nd day. I removed the old terminal block and replaced the part in abo ut 10 minutes..Thank you Parts Select for your easy to find diagrams and quick delivery.
Was this helpful?
Thank you for voting!
All Instructions for the KEBC24
61 - 75 of 99