KDRP487MSS01 KitchenAid Range - Parts

7-18 x 3/4-Inch - sold individually.

This is a multi-use and multi-appliance screw. It can be used on a microwave, refrigerator, range/oven, air conditioner, dehumidifier, washer, or dryer. The measurements of this screw are 8 x 1/2 inch. It has 6 threads. Refer to the manual provided by the manufacturer for further information on repair and accurate guidance. Remember to wear work gloves as a safety precaution.

This halogen light bulb is a type of lamp that uses a halogen gas mixture for better lighting quality and longevity. It is an authentic OEM replacement bulb designed for use in ovens and ranges. It is used to illuminate the oven cavity. Over time, the filament inside the bulb can wear out and break, causing the lamp to fail. A faulty sock...Read moreet connection can also cause the bulb to lose electrical contact and stop working. If your oven light is faulty, you will have difficulty seeing and monitoring the food throughout the cooking process. Locate the bulb housing inside the oven cavity and carefully remove the bulb from the socket. Place your new bulb into the socket and ensure the bulb housing is secure. Note that each light bulb is sold individually.

The temperature sensor measures the temperature inside the oven. If your oven is too hot, not heating evenly, is not heating enough when baking, or simply will not start, you could have a faulty temperature sensor. A faulty temperature sensor can be a fire risk. If your sensor is not working properly, you should look to replace it straigh...Read moret away. A failed oven sensor is most often responsible for F3 or F4 error messages on electronically-controlled ovens. Make sure you disconnect the power to your range before you start your repair.

This broil element is a genuine replacement part designed to deliver high-intensity heat from the top of electric ranges and wall ovens. It plays a critical role in broiling by generating consistent heat for browning and cooking food. Compatible with select Whirlpool and related brand models, this component is ideal for restoring function...Read moreality when the broil feature fails to produce heat, distributes heat unevenly, or emits unusual odors. The element operates by converting electrical energy into radiant heat, and its failure can result in poor cooking performance or safety concerns. Installation requires disconnecting power, using basic hand tools, and securing the wires to prevent them from slipping into the oven cavity. Always consult your appliance’s manual for model-specific instructions.

This thermostat is also known as a thermal cut-off fuse and is used in conjunction with your range. This part establishes and maintains the internal temperature of the oven cavity. When the temperature of your range gets too hot it will trip the high-limit thermostat safety, this will cut the power to the oven so that it does not continue...Read more to overheat. For this installation, you will need a Phillips screwdriver and a pair of needle-nose pliers. If your oven does not heat after a self-cleaning cycle you may need to replace the high-limit thermostat.

This is the inner most piece of glass.

This screw is sold individually.

Burner Cap - 6000 BTU Sold individually.

Sold individually.

Sold individually.

Follow appropriate safety practices when installing your range screw. Sold individually.