KDPS624SBE0 Whirlpool Dishwasher - Parts

The mounting bracket is sold individually, without screws. This part secures the upper side of the dishwasher to the underside of the counter or cabinet to prevent the dishwasher from moving, shaking, or tilting forward. The bracket is made entirely of metal. It is recommended to check all brackets, if applicable, because they often wear ...Read moreat the same rate and both may need to be replaced. This is an OEM part that is sourced from the authentic manufacturer. Tools needed are a pair of needle nose pliers and a screwdriver.

Sold individually.

The hose clamp is used to hold the water hose in place which will prevent the hose from leaking water. Sometimes the clamp may lose its ability to latch on, causing a leaking washer. For the installation, you will need a flat head screw driver to replace the clamp and a drill to access the screws to remove the front of the washer. Be care...Read moreful if you do not have specific clamp pliers as the clamp could fly off. Once the front of the washer has been removed, take a quick look for water damage or any obvious signs of where the leak is coming from. If it is not obvious, run water to test.

This screw provides secure fastening for components, helping maintain proper alignment and structural stability during operation. Correct fastening reduces vibration, prevents component movement, and supports long-term reliability. Replacing missing or damaged screws restores secure assembly and dependable performance.

A missing, loose, or stripped screw can let a dishwasher panel, bracket, or rack part move during use. This 10-16 screw holds the correct part in place and is made for a damp setting. Before replacing it, inspect the mounting hole and the part being held for cracks or worn threads. Confirm the screw size, length, and location with the ful...Read morel dishwasher model. Turn off power and water if the repair requires opening a panel. Start the screw by hand, tighten it only until snug, and never use a longer screw that could damage hidden parts.

This dishwasher float switch helps monitor water levels during operation to prevent overfilling and potential leaks. When the water level reaches the correct height, the switch signals the dishwasher to stop filling and drain as needed. Replacing a faulty float switch can resolve issues such as the dishwasher not filling properly or water...Read more continuing to fill and overflow. Installation is straightforward and can be completed with basic tools.