My Orders
- Home
- KDPM604KPS2
- Instructions
KDPM604KPS2 KitchenAid Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Owner lost parts. Reordered them.
2 of 2 people
found this instruction helpful.
-
DANIEL from STAMFORD, CT
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
Cut DW brackets to size, attached to DW. Bent back tabs, pushed DW into place and installed screws.
Other Parts Used:
Was this helpful?
Thank you for voting!
installer from lowes di not do it right, forgot to put scew in, instead he used shims, as usuall no more installs from Lowes
4 of 9 people
found this instruction helpful.
-
Joel from ROLLA, MO
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
followed directions, a kid could have done it,
Was this helpful?
Thank you for voting!
Tine on rack was rusted and needed to be replaced.
2 of 4 people
found this instruction helpful.
-
Jeanne from FAYETTE, OH
- Really Easy
- Less than 15 mins
Just replaced it in the notches that held the rusted tine.
Was this helpful?
Thank you for voting!
Warranty Service lost the two screws that held the cover below the door in place
1 person
found this instruction helpful.
-
Joseph from Sterling Heights, MI
- Really Easy
- Less than 15 mins
It’s great when you have parts that fit and a schematic to go by. I got both from this site. There are three parts that these screws hold in place. Use the schematic to see which way each part is facing. Line all the parts up and then look through the covers. You’ll see pre drilled holes on either side of the cover. Line the screws up to
... Read more
the pre drilled holes. Put the first screw in half way then insert the second screw all the way. Come back to the first screw and tighten it all the way. Two screws, two minutes and I was done. Real easy repair, just awkward as you are on your belly on the floor. I used a drill with a socket that fit the screw head.
Read less
Was this helpful?
Thank you for voting!
Dishwasher would not completely drain e1 f9 error
1 person
found this instruction helpful.
-
Gerould from East Wenatchee, WA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Pulled the dishwasher out from under counter - removing 2 screws accessible on sides of dishwasher - these screws hold dishwasher under counter. Drain pump accessible right side bottom. Disconnect wiring clip - grab pump turn counter clockwise 1/4 turn and pull out of housing. Then reverse this process for installation
Was this helpful?
Thank you for voting!
Steam leaking from inner seal of door
2 of 5 people
found this instruction helpful.
-
Erik from KALISPELL, MT
- Very Easy
- Less than 15 mins
Inner gasket (Part # PS16221119) was angled in at the corners, so it wouldn't make a seal with the door, resulting in steam leakage and damage to adjacent cabinet door. Simply pulled out old gasket, pushed new one into track and voila, problem solved. New gasket angles out at corners, creating steam-tight seal.
Was this helpful?
Thank you for voting!
tine-row rusted and broke
2 of 5 people
found this instruction helpful.
-
Warren from Ballston Lake, NY
- Really Easy
- Less than 15 mins
quick and easy,tine-row just snapped right in! Took about 15 seconds!
Was this helpful?
Thank you for voting!
The dishwasher came without the middle rack arm manifold
1 of 3 people
found this instruction helpful.
-
Patrick from WICHITA, KS
- Very Easy
- Less than 15 mins
-
Screw drivers
I just popped the new one onto the bottom of the middle rack and it was done. Easiest repair I have EVER done!
Was this helpful?
Thank you for voting!
fitting leaking
0 of 1 people
found this instruction helpful.
-
James from Tupelo, MS
- Really Easy
- Less than 15 mins
-
Pliers
repair by replacement
Was this helpful?
Thank you for voting!
The Dishwasher was not firmly connected to the counter
0 of 2 people
found this instruction helpful.
-
Antony from Lakewood Ranch, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
Very simple repair when you're supplied with the proper parts. Their delivery time is exceptional !
Was this helpful?
Thank you for voting!
Screws on the door of the dishwasher were very loose.
1 of 6 people
found this instruction helpful.
-
Kathryn from Carol Stream, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!
Was this helpful?
Thank you for voting!
Under Counter Anti-Tip Brackets Broke
-
Scott from Maple Valley, WA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I put this unit in about 3 years ago and the brackets broke at the crease and the dishwasher fell forward. Found the right bracket and when it arrived looked a match. Checked link to video showing how to properly install the brackets. The original manufacturer never stated that the tab that goes through the frame is supposed to be bent 90
... Read more
degrees to prevent the bracket from coming out. Thank you PartSelect for that video because I would probably end up ordering brackets again in a few years.
Read less
Was this helpful?
Thank you for voting!
lower rack tine was broken
-
Carol from Lutherville, MD
- Really Easy
- Less than 15 mins
Just snapped it in
Was this helpful?
Thank you for voting!
Two rusted lower tine rows
-
Lisa from Ormond Beach, FL
- Really Easy
- Less than 15 mins
Quick and easy repair--less than a minute for each row. The replacement tines are a finer gauge than the originals but fit the space well.
Was this helpful?
Thank you for voting!
none
-
Edith from Marietta, OH
- Really Easy
- Less than 15 mins
removed old rack and replaced with the new.
Was this helpful?
Thank you for voting!