All Installation Instructions for Whirlpool Dishwasher KDFM404KBS0

Old rack had rusted out

0 of 1 people found this instruction helpful.

Justin from Fort Wayne, IN
Really Easy
Less than 15 mins

Replaced the old rack with a new one. Saved about $30.

Was this helpful?

fitting leaking

0 of 1 people found this instruction helpful.

James from Tupelo, MS
Really Easy
Less than 15 mins
Pliers

repair by replacement

Was this helpful?

The Dishwasher was not firmly connected to the counter

0 of 2 people found this instruction helpful.

Antony from Lakewood Ranch, FL
Really Easy
Less than 15 mins
Screw drivers

Very simple repair when you're supplied with the proper parts. Their delivery time is exceptional !

Was this helpful?

Screws on the door of the dishwasher were very loose.

1 of 6 people found this instruction helpful.

Kathryn from Carol Stream, IL
Really Easy
Less than 15 mins
Screw drivers

Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!

Was this helpful?

prongs were braking off on the rack

Donna K from Alexander, NY
Really Easy
Less than 15 mins

took the old rack out and rolled the new one in. Took about 2 mins if at all that.

Was this helpful?

Under Counter Anti-Tip Brackets Broke

Scott from Maple Valley, WA
Really Easy
Less than 15 mins
Pliers, Screw drivers

I put this unit in about 3 years ago and the brackets broke at the crease and the dishwasher fell forward. Found the right bracket and when it arrived looked a match. Checked link to video showing how to properly install the brackets. The original manufacturer never stated that the tab that goes through the frame is supposed to be bent 90 ... Read more

Read less

Was this helpful?

replace lower rack

Dennis from Naperville, IL
Really Easy
Less than 15 mins

open dishwasher remove lower rack roll in new lower rack

Was this helpful?

Simply replaced lower dish rack in dishwasher.

Susan from CHARLOTTESVILLE, VA
Really Easy
Less than 15 mins

No explanation is necessary.

Was this helpful?

old dish holders rotted from hard water

Melvyn from Mountain Springs, NV
Really Easy
Less than 15 mins

replace bottom tray with wheels. I recommend get them with wheels already attached. Very difficult to remove old wheels from rack.

Was this helpful?

Two rusted lower tine rows

Lisa from Ormond Beach, FL
Really Easy
Less than 15 mins

Quick and easy repair--less than a minute for each row. The replacement tines are a finer gauge than the originals but fit the space well.

Was this helpful?

none

Edith from Marietta, OH
Really Easy
Less than 15 mins

removed old rack and replaced with the new.

Was this helpful?

lower rack tine was broken

Carol from Lutherville, MD
Really Easy
Less than 15 mins

Just snapped it in

Was this helpful?

I had not needed to install the mounting brackets that came with the dishwasher because the old counter top was 1 inch lower than standard and I was able to just wedge the dishwasher into the space and it would not tip.

Bob from Montrose, CO
Really Easy
15 - 30 mins
Nutdriver, Pliers, Screw drivers

I simply disconnected the power line to the dishwasher and pulled it out enough to install the mounting brackets. The installation manual that came with the dishwasher described how to install the brackets and I simply followed directions.

Was this helpful?

Dishwasher basket broken

Anita from Croton on Hudson, NY
Really Easy
15 - 30 mins

We used the rollers and utensil basket from the old basket and in less than 30 minutes the new basket was ready and installed.

Was this helpful?

KDFM404KBS0 Whirlpool Dishwasher - Instructions