My Orders
- Home
- KDFE304RPS0
- Instructions
KDFE304RPS0 Whirlpool Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Under Counter Anti-Tip Brackets Broke
-
Scott from Maple Valley, WA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
I put this unit in about 3 years ago and the brackets broke at the crease and the dishwasher fell forward. Found the right bracket and when it arrived looked a match. Checked link to video showing how to properly install the brackets. The original manufacturer never stated that the tab that goes through the frame is supposed to be bent 90
... Read more
degrees to prevent the bracket from coming out. Thank you PartSelect for that video because I would probably end up ordering brackets again in a few years.
Read less
Was this helpful?
Thank you for voting!
I had not needed to install the mounting brackets that came with the dishwasher because the old counter top was 1 inch lower than standard and I was able to just wedge the dishwasher into the space and it would not tip.
-
Bob from Montrose, CO
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers
I simply disconnected the power line to the dishwasher and pulled it out enough to install the mounting brackets. The installation manual that came with the dishwasher described how to install the brackets and I simply followed directions.
Was this helpful?
Thank you for voting!