KDFE2 Dishwasher - Parts

This part has a swivel gooseneck fitting and that allows it to be installed closer to the wall. This part has a 3/4" hose thread on one side and a 3/8" copper tubing on the other side.

The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

The water inlet valve assembly is a crucial component of dishwashers that controls the flow of water into the unit. This genuine OEM replacement part includes the inlet valve, inlet hose, and hose clamp to ensure the proper water supply for your dishwasher’s operation. Designed for specific models, this part ensures that water is fed into...Read more the dishwasher during the wash cycle, promoting efficient cleaning. Before installation, it is important to unplug the dishwasher and turn off the water supply to avoid any accidents. Wear work gloves for your safety during the installation process. Be sure to verify the compatibility with your dishwasher’s model number, as similar-looking parts may have slight variations in size or design.

This OEM dishrack guard clip fits on the front of the upper dishrack and acts as a bumper between the rack and inner door panel. This guard clip is approximately 3 inches long and made of plastic. To replace this part, open the dishwasher door and then slide the upper dishrack out, then simply unclip the faulty guard clip before fastening the new one.

This is connected to the water valve, is located on the side of your tub and allows water to enter your dishwasher. ***Note: This part does not include the inlet gasket - must order separately.

The pump motor delivers water to the spray arms to clean the dishes during the wash cycle.

This is a flexible drain hose that is 12 feet long.

This heating element is a genuine OEM replacement sourced directly from the original manufacturer for use in various models of dishwashers. The element is designed to heat water inside the dishwasher during the wash and rinse cycles to enhance the efficiency of the cleaning process. It is positioned at the bottom of the dishwasher tub, be...Read moreneath the lower rack. The heating element includes a bushing, which is a protective covering that prevents water from coming into contact with the electric terminals, and two plastic nuts.

Includes power cord and all necessary parts needed for complete installation of cord.

Sold individually. The size of this screw is 1/4" hex head and 10-12 x 1/2".