My Orders
- Home
- KDFE105PPS0
- Instructions
KDFE105PPS0 KitchenAid Dishwasher - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Warranty Service lost the two screws that held the cover below the door in place
1 person
found this instruction helpful.
-
Joseph from Sterling Heights, MI
- Really Easy
- Less than 15 mins
It’s great when you have parts that fit and a schematic to go by. I got both from this site. There are three parts that these screws hold in place. Use the schematic to see which way each part is facing. Line all the parts up and then look through the covers. You’ll see pre drilled holes on either side of the cover. Line the screws up to
... Read more
the pre drilled holes. Put the first screw in half way then insert the second screw all the way. Come back to the first screw and tighten it all the way. Two screws, two minutes and I was done. Real easy repair, just awkward as you are on your belly on the floor. I used a drill with a socket that fit the screw head.
Read less
Was this helpful?
Thank you for voting!
Screws on the door of the dishwasher were very loose.
1 of 6 people
found this instruction helpful.
-
Kathryn from Carol Stream, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
Went to PartsSelect. Put in Dishwasher model number. Chose the screws for that model number. Ordered the screws. Can't get any easier than that!
Was this helpful?
Thank you for voting!