KBRS36FKB02 KitchenAid Refrigerator - Parts

This part turns the light on/off as the door opens and closes.

This screw is sold individually.

The thermistor changes resistance as it senses the refrigerator temperature and sends a corresponding voltage to the pc board.

This screw is sold individually.

Introducing the Power Disconnect Switch from Whirlpool, a genuine OEM part renowned for its compatibility with various models from brands like KitchenAid, Maytag, Jenn-Air, Amana, Inglis, and Magic Chef. This power disconnect switch is an essential part for your refrigerator, allowing you to turn off power during maintenance or long-term ...Read morevacancies. Prior to incorporating this component, ensure your refrigerator is unplugged - this will ensure optimal safety. Designed for installation with minimal hassle, it is wise to wear gloves in order to protect your hands during the process. Be sure to confirm this part's compatibility with your model prior to purchase, as variations in size and shape exist amongst parts that may appear notably identical. Trust in Whirlpool's commitment to quality and performance with your appliance needs.

This drip pan is used on self defrost refrigerators.

This fan blade circulates air over the condenser. It mounts onto the shaft of the condenser fan motor.

This kit includes the motor, blade and bracket. This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

This is an inverter board for a compressor.

The speed nut (also referred to as a condenser motor fan nut), fits onto the condenser fan motor. The motor for this fan turns on simultaneously with the evaporator and the compressor motors, so a malfunction in the condenser fan motor could cause your fridge to cycle on and off more frequently or run too warm, or too noisily. Make sure t...Read morehat the speed nut is properly attached and tight. Check the nut for any signs of wear or damage. If the nut is damaged and refuses to tighten, you should replace the part immediately. Remember to unplug your refrigerator before starting this repair.