Models > KBDS250X4 > Instructions

KBDS250X4 KitchenAid Food Waste Disposer - Instructions

All Instructions for the KBDS250X4
1 - 3 of 3
Keep searches simple. Use keywords, e.g. "leaking", "pump", "broken" or "fit".
Leak around discharge pipe
Was amazed the gasket was delivered the day after I ordered it! Removed old gasket and cleaned out what I thought was accumulated waste. Replaced gasket and ran water, had a flood. What I had removed was rusted part of appliance. Unable to repair and ended up replacing the garbage disposal. Bad Luck.
Parts Used:
Gasket
  • Richard from Freeport, ME
  • Difficulty Level:
    A Bit Difficult
  • Total Repair Time:
    1- 2 hours
  • Tools:
    Pliers, Screw drivers, Wrench set
11 of 20 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
Switch was clogged with food
I need to put rubber washer and internal nut to retain the switch in place and the cover switch doesn't retain the screw ( this was passing through without retain the cover )
Parts Used:
Start Switch Kit
  • Alvaro from Norwalk, CT
  • Difficulty Level:
    Difficult
  • Total Repair Time:
    More than 2 hours
  • Tools:
    Nutdriver
1 person found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
worn out gasket
installed new gasket by hand.
Parts Used:
Inner Stopper Gasket
  • George E. from Marysville, WA
  • Difficulty Level:
    Really Easy
  • Total Repair Time:
    Less than 15 mins
0 of 3 people found this instruction helpful.
Was this instruction helpful to you?
Thank you for voting!
All Instructions for the KBDS250X4
1 - 3 of 3