KAWE570BAL1 KitchenAid Washer - Parts

This kit comes with the clamps.

This is a replacement suspension spring retainer for your washer. The retainer holds the suspension spring in place while the washer is operating. If you notice movement, or an unusual noise or shaking of your washer when it is in use, it could mean that the suspension spring has been disconnected because of a broken or missing spring ret...Read moreainer. You will find the suspension spring retainer at the bottom of the tub assembly. To replace the retainer, use a pair of pliers to disconnect the suspension spring from the chassis mount to relieve the tension. Then, remove the spring from the retaining clip, and remove the retaining clip from the bottom of the washer. Attach the new retaining clip to the bottom of the washer, reattach the spring, and stretch it slightly so it can connect to the chassis. This part is sold individually.

This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.

This part is used to activate the lid switch when the lid opens/closes.

Sold individually. NOTE: The color on the screw may not be the same as the image, but will still function the same.

This is used in your direct drive washer that has a neutral drain.

This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. ...Read moreBe sure to disconnect the water supply to the washer before you begin this repair. You should also determine if any of the other parts that transport water into the washer are leaking, and if they need to be repaired as well. This part is sold individually and is a genuine OEM part.

This washer drive block is an essential component that connects the inner spin basket to the drive shaft, enabling proper spinning during wash and spin cycles. Measuring approximately 2-5/16 inches high, it is designed for large-capacity washers with belt or direct drive systems. A worn drive block can cause loud noises, shaking, poor spi...Read morenning, or leave clothes excessively wet. Installation requires basic tools and disassembly; always unplug the appliance and shut off water supply before starting the repair. Regular inspection and timely replacement help maintain optimal washer performance.

This part prevents water from flowing back into your main water supply line.

This genuine washing machine clutch band and lining kit helps regulate power transfer between the transmission and wash basket during the spin cycle, allowing the basket to gradually reach full spin speed for effective water extraction. Replacing a worn or damaged clutch can help resolve issues such as slow spinning, clothes remaining wet...Read more after a cycle, failure to spin, unusual noises, excessive vibration, or a burning smell during operation. The kit includes the clutch band and lining, brake cam driver, springs, and spring end caps needed to restore proper clutch performance. Installation typically involves accessing the drive system, removing the worn clutch components, installing the replacement parts, and reassembling the washer before testing operation. This OEM replacement kit is designed to restore smooth, reliable spin performance and improve overall washer efficiency.

Sold individually.

This dispenser releases fabric softener at the right time in the wash cycle. Replace if clogged, leaking, or not dispensing. This part is designed to keep your appliance operating reliably and efficiently. Replacing a worn or failing component helps prevent further issues and can extend the overall lifespan of your unit.