K6000GH (K 6000 GH 1.194-109.0) Karcher Pressure Washer - Parts

This part is a Retrofit Valve that will work on the older models as well as the newer models. Older units have shorter valves than the new pumps but you can change the length of the stem to adjust for the older units.

This rubber buffer is an authentic OEM component which is designed for use with Karcher pressure washers. It is attached to the bottom of the frame in order to provide support for the unit. Over time it may wear out, get damaged or lost eventually requiring a replacement. Make sure to refer to the diagrams of your model for the exact loca...Read moretion and the correct installation. One durable rubber buffer is included. Note, the bolt that secures this component is sold separately. Replacing this buffer is a simple task that should not require any tools. If your old part does not unscrew, you may use pliers to remove it.

This replacement filter is supplied directly from the original equipment manufacturer for use with Karcher pressure washers. It helps to ensure the water that goes through the unit is free of dirt and other harmful contaminants. It can over time get clogged, damaged or lost eventually requiring a replacement. Keep in mind this high-qualit...Read morey filter is sold as an individual item. Refer to the owner's manual for your model to ensure the correct repair procedure.

This is an authentic Karcher replacement part manufactured for use with pressure washers. The spacer is used as an isolator to reduce vibration from the engine. This spacer fits between the engine and the frame, please note the spacer is sold as an individual replacement part.

This item has been sourced from the original manufacturer to be used with pressure washers from Karcher. The plastic sleeve is part of the pump assembly and is used to provide spacing and to support the piston rod. This sleeve is sold as a single item.

This is an authentic Karcher replacement part that has been sourced from the original manufacturer to be used with pressure washers. The metal cap is used to cover the end of the axle that the wheel mounts to. This cap is available as an individual replacement part.

This replacement soap diffuser hose is specially manufactured for use with Karcher pressure washers. It is the hose that the in-tank filter is attached to to deliver the soap needed for the unit. It is made from durable flexible rubber material and it is sold individually.

This O-ring is an OEM component of the nozzle insert on various Karcher pressure washers. An O-ring is a flexible ring used as a pressure seal between rigid parts. It is a simple yet essential part for machine performance. This ring is sold individually.

This is an authentic OEM sourced component which is specially designed for use with Karcher pressure washers. The piston is an important part that helps to build up pressure inside the cylinder. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer to the owners man...Read moreual and the appropriate diagrams of your model for the correct location and application of this piston. Keep in mind this high-quality item is made of durable metal and is sold individually.