K185 (K 185 1987-01) Husqvarna Concrete Saw - Parts

This piston ring is an OEM part that performs a seal between the piston and the cylinder wall of your engine. It is black in color, sold individually, and made of metal. Over time, your piston ring may be experiencing wear, stress, or fatigue, causing it to become damaged or worn. If your engine is experiencing poor performance, the pisto...Read moren ring may be the cause. A troubleshooting tip: perform a dry compression test first, and if the compression falls below manufacturer specs, next, perform a wet test. If the compression increases, you will know you have worn out piston rings, because the oil fills the gap between the piston ring and the cylinder walls, increasing compression. This is one of our more advanced repairs, but with a wrench, sockets, pliers, screwdriver, and a piston installation tool, you can carry it out yourself. The piston ring attaches around the piston, inside the groove on it. If there is more than one piston ring space, gap them away from each other so the compression does not blow past them into the crankcase.

A replacement inlet valve component used in small two-stroke and handheld engine applications to regulate intake flow; manufactured to OEM tolerances for correct fit and consistent engine performance.

This is a genuine Husqvarna replacement part that is sourced from the original manufacturer for use with chainsaws, brushcutters, and power cutters. Ball bearings are commonly used to reduce friction between a rotating shaft and fixed part assembly. This bearing is used with several different types of equipment and the application of the ...Read morebearing can vary based on the model of the tool. This bearing is sold individually.

This is an authentic manufacturer-sourced replacement part is specially designed for use with Husqvarna and Poulan handheld lawn and garden equipment. It helps to distribute the pressure and provide a tight seal between connected parts. This is a standard hardware which has multiple applications, please make sure to check the appropriate ...Read morediagrams of your model for the correct location and application of this item. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine Husqvarna replacement that has been OEM sourced and is intended to be used with chainsaws, blowers, and brushcutters. The metal nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. The nut is sold as an individual replacement part.

This filter, or fuel filter, is an OEM part that is sold individually. It is a plastic part with a felt filtration system inside, and serves the purpose of cleaning the fuel in your engine of debris. White and blue in color, the fuel filter may become clogged over time, starving the engine of fuel, causing poor performance of your engine ...Read moreor a no-start symptom. When this occurs, the filter must be replaced. It should also be replaced regularly as part of good engine maintenance, to prevent these symptoms. It is a repair our customers found very easy. Simply use a hook or pliers to remove the old filter from the tank, and insert the new filter into the tank.

This starter handle is an authentic OEM sourced item, it is not an aftermarket imitation. It is specially designed for Husqvarna power cutters. This is the handle for the recoil starter assembly. One plastic starter handle is included per order.