My Orders
JX81A General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Replace Charcoal Filter
33 of 49 people
found this instruction helpful.
-
Stuart from North Port, NY
- Easy
- Less than 15 mins
-
Screw drivers
Philips head screwdriver to remove 2 screws holding plastic grill above microwave door in place. Old Filter lifts out slide new filter in. It rests on an angle. Re insert Grill (careful that plastic tabs slide into proper slots). Tighten SCrews
Was this helpful?
Thank you for voting!
Grill for exhaust was broken.
5 of 6 people
found this instruction helpful.
-
David from Lafayette, CO
- Really Easy
- Less than 15 mins
-
Screw drivers
Ordered a replacement grill, replaced the optional charcoal filter at the same time. Took just a little effort to get the alignment tabs in place--required just a little more elbow grease than you'd think, then replaced the two screws.
Was this helpful?
Thank you for voting!
We couldn't install it - received wrong part.
1 person
found this instruction helpful.
-
MARILYN from SOLANA BEACH, CA
- Very Difficult
- More than 2 hours
The filter we have is 6x4. I ordered by phone.They sent the wrong part - 6x11.
We returned it to Post Office at our own cost - $8.85 May26. Tracked - it arrived May 28. So far we do not have the correct filter. We are waiting for the refund. Charged $49.99 plus tax & shipping of $7.75.
Thank you for helping us get the corr ... Read more ect filter and a refund. We should not be charged for returning the wrong part they sent us by mistake.
Marilyn Tostado
We returned it to Post Office at our own cost - $8.85 May26. Tracked - it arrived May 28. So far we do not have the correct filter. We are waiting for the refund. Charged $49.99 plus tax & shipping of $7.75.
Thank you for helping us get the corr ... Read more ect filter and a refund. We should not be charged for returning the wrong part they sent us by mistake.
Marilyn Tostado
Read less
Was this helpful?
Thank you for voting!
Normal maimtemance
-
John from Brockton, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
very ease
Was this helpful?
Thank you for voting!
Filter old, needed replacement
-
Richard from Carson City, NV
- Really Easy
- Less than 15 mins
-
Screw drivers
Remove 2 screws, remove cover, remove filter, reverse proceedure.
Was this helpful?
Thank you for voting!
dirty rotted filter
-
Kenneth from Riverhead, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
great correct part thanks
Was this helpful?
Thank you for voting!
needed to replace charcol filter
-
JOHN from MADISON, WI
- Really Easy
- Less than 15 mins
-
Screw drivers
followed the easily understood step by step instructions from the owner's manual
Was this helpful?
Thank you for voting!
Charcoal filter needed replaced
-
Carol from Bethel Park, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took out the 2 screws holding the front grill on. Took out the old filter and put in the new one. Then put the grill back on...DONE!!!
Was this helpful?
Thank you for voting!
filter in fan over stove had not been replaced since we bought this place.
-
Linda P. from Naples, FL
- Really Easy
- Less than 15 mins
-
Screw drivers
My husband simply unscrewed the front of the vent, pulled out the old filter and slid the new one in. After cover was washed and dried, he screwed the cover back on and Voila!The vent fan is much quieter now and it clears the air quickly when it is in use.
Was this helpful?
Thank you for voting!