My Orders
JV322102 Hotpoint Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The grease filter was VERY dirty and beat up.
10 of 14 people
found this instruction helpful.
-
Betsy from Carlsbad, NM
- Really Easy
- Less than 15 mins
Tried our local and new Lowe's; clerk said they couldn't find it on their computer. Came home, tried the internet; found one on your site and ordered it; was here in 'a flash'. So happy you had one in stock. Thank you!!!!!
Was this helpful?
Thank you for voting!
broken fan blade in the freezer compartment
7 of 9 people
found this instruction helpful.
-
John from Cumberland, MD
- Really Easy
- Less than 15 mins
-
Pliers
Unplugged frige, removed top shelf, pulled broken fan blade off. Replaced with fan blade just purchased from PartSelect. Very simple repair. Orderd and recieved the right part.
Was this helpful?
Thank you for voting!
a fan blade broken causing it to make a loud noise
3 of 5 people
found this instruction helpful.
-
Marnie from Denver, CO
- Really Easy
- Less than 15 mins
-
Pliers
we took off the old one and replaced it.
Was this helpful?
Thank you for voting!
family member melted fan with hair dryer
1 person
found this instruction helpful.
-
Lauraine from Rocky Hill, CT
- Really Easy
- Less than 15 mins
-
Screw drivers
Unplugged fridge.Removed 2 screws holding a panel. After panel removed took off old fan and inserted new. Quite simple.
Was this helpful?
Thank you for voting!
Fan blade broken
2 of 5 people
found this instruction helpful.
-
John from Cumberland, MD
- Really Easy
- Less than 15 mins
Removed the broken fan blade (just pulled off) and replaced with part purchased PartSelect. Very easy repair, no tools required.
Was this helpful?
Thank you for voting!
Lamp switch would not return to original position rendering the switch inoperable.
1 of 2 people
found this instruction helpful.
-
Richard from Lynn, MA
- A Bit Difficult
- 15 - 30 mins
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
Remove 6 screws that hold the light and fan filter in place. Remove the four bolts that hold the control panel. Remove the four screws that hold the circuit board to the control panel. Disconnect the wires to the switch. Replace switch and reverse the disassembly procedure.
Was this helpful?
Thank you for voting!
Noisy fan
-
Robert L. from Eldred, PA
- Really Easy
- 15 - 30 mins
-
Screw drivers
Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple
Was this helpful?
Thank you for voting!
Filter stopped up
-
Billy from Peachland, NC
- Really Easy
- Less than 15 mins
-
Screw drivers
Snapped the old one out; snapped the new filter in.
Was this helpful?
Thank you for voting!