My Orders
- Home
- JSP42SN2SS
- Instructions
JSP42SN2SS General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
no racks to oven
-
Johnette from Baltimore, MD
- Really Easy
- Less than 15 mins
Easily glide in.
Was this helpful?
Thank you for voting!
Our bottom drawer support broke and the bottom drawer was canted
-
Robert from Woodinville, WA
- Really Easy
- Less than 15 mins
-
Screw drivers
Simply removed drawer and lined up the newsupports. Made sure the guide pin was lined up and installed with single screw
Was this helpful?
Thank you for voting!
Plastic slide for storage drawer broken.
-
James from Stuart, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
Took part out of package, looked at instructions and followed them. Required a screwdriver to screw part on to the drawer.
Was this helpful?
Thank you for voting!
Replaced damaged oven rack
-
Vicki from Irvine, CA
- Really Easy
- Less than 15 mins
I ordered the oven rack on a Tuesday and received it the very next day - was wowed at the service.
Was this helpful?
Thank you for voting!
Missing oven rack
-
Damaris from Easton, PA
- Really Easy
- Less than 15 mins
I opened oven and pushed oven rack inside.
Was this helpful?
Thank you for voting!
I needed an oven with three racks, mine came with two.
-
BETTY from CYPRESS, TX
- Easy
- Less than 15 mins
just slipped it in
Was this helpful?
Thank you for voting!
Burner not operational.
-
Gerald from Philadelphia, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Disconnected power supply. Removed damaged element by releasing retainer clips and unplugging wire contacts. Replaced with new element.
Was this helpful?
Thank you for voting!
Range lower drawer would not stay on track.
-
Richard from Newark, DE
- Really Easy
- Less than 15 mins
-
Nutdriver
Easy to install replacement parts using the screws provided.
Was this helpful?
Thank you for voting!
Old dishwasher rack and silverware rack
-
Anne Marie from Andover, MA
- Really Easy
- Less than 15 mins
The whole process was very easy! I just got the model number and bought a new rack and silverware holder on,one. There was no assembly needed so I just popped them in and replaced the old ones! Very easy to do!
Was this helpful?
Thank you for voting!
Broken drawer support
-
Mario from Deer Park, WA
- Really Easy
- Less than 15 mins
-
Nutdriver
Followed the example picture on the part bag. Anyone could do this, incredibly easy. Took about 4 minutes to install both sides.
Was this helpful?
Thank you for voting!
Center Of Knob Broken
-
Wayne from Blakely, GA
- Really Easy
- Less than 15 mins
No repairs-----new knob ordered & recieved
Was this helpful?
Thank you for voting!
Open door. Put racks in.
-
Harriet from Jacksonville Beach, FL
- Really Easy
- Less than 15 mins
nothing to it.
Was this helpful?
Thank you for voting!
Stove drawer rear guides broken
-
Robert from Shakopee, MN
- Really Easy
- Less than 15 mins
-
Nutdriver
Installed new guides with a nut driver without any problems.
Was this helpful?
Thank you for voting!
gasket on door was brittle
-
Barbara from Bethesda, MD
- Really Easy
- Less than 15 mins
I feel like Macho Mom. I called in the repair guy since I was afraid of dealing with the gas. HE repaired one item but could tell I was comfortable fixing things and pointed out that the gasket was brittle and would cause major problems if not replaced. Took longer to order the part than do the repair, don't know what I was afraid of!
Was this helpful?
Thank you for voting!
The stove-top knob broke
-
JUDITH from COLORADO SPRINGS, CO
- Really Easy
- Less than 15 mins
I pushed the knob into place. No tools, approximately 30 seconds and good as new.
Was this helpful?
Thank you for voting!