EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

JS968TF1WW General Electric Range - Instructions

All Instructions for the JS968TF1WW
46 - 60 of 149

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
The front right outer element was defective.
4 of 5 people found this instruction helpful.
  • Peter from Abbeville, LA
  • Really Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
My cooktop is a stand alone unit mounted in a counter top not associated with an oven.
-Removed power to the cook top. Breaker off.
-Lifted the cook top straight up from the counter top and placed two 24 inch board strips to support it above the counter top. This was very easy by pushing up from the bottom of the cook top. T his is a two person job preferably.
-Removed the six phillip screws below the glass surface edge. 3 in the front, three in the back.
-Remove knobs and remove the glass top by lifting straight up.
-Record the wire positions on the element on paper and remove the connections.
-The element is mounted on two spring loaded studs that have spring clips as a retainer. Remove the two clips by pulling straight up with a plier or needlenose.
-The replacement element did not come equipped with the two mounting ears that the original had. I removed the two ears from the defective element and installed them on the new element. Very easy. Two phillips screws. The elements have perferations in the correct areas to accommodate this.
-Placed the new element in position and reinstalled the spring clips.
-Install the wiring terminals in the correct positions.
-Reinstalled the glass surface and the six phillips screws. Reinstall the knobs.
-Lower the cook top back into its counter top position.
-Return power to the cook top.
-Installation complete. Very simple!
Was this helpful?
Thank you for voting!
The dual burnner had somthing drop on it and it went out
3 of 3 people found this instruction helpful.
  • Thad from Layton, UT
  • A Bit Difficult
  • 15 - 30 mins
  • Screw drivers
I pulled out the range from the wall unplugged it from the wall then i opened the oven door and removed the two small screws on the front off the range and lifted the glass top and supported it with a 1/2" X 18inc wooden dowel, then i removed the two burner retaining screws with a small Phillips screw driver and removed the wires from the burner,
then i replaced the burner with the new one and reconnected the wires and placed the burner in to the two retaining clips and then tightened the two screws then i removed the wooden dowel and installed the two screws on the front bottom side on the range then i plugged in the range in and tested the burner then put the range back against the wall.
Was this helpful?
Thank you for voting!
Inner glass assembly had cracked
3 of 3 people found this instruction helpful.
  • Richard from Gorham, ME
  • Really Easy
  • 30 - 60 mins
  • Socket set, Wrench set
Took the oven door off and removed the inner door panel, put new glass assembly part in and reassembled. The hard part was getting the door hinges locked back into place.
Was this helpful?
Thank you for voting!
Inside burner would no longer heat
3 of 3 people found this instruction helpful.
  • John from CHARLESTOWN, NH
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
I went online and ordered the part after reading other people's repair experiences, confident that I could do it because the part was quite pricey. First, be sure you're circuit breaker to your range is off. Next, open the oven door and locate and remove two screws with a socket, that are just under the top surface which will allow you to lift up the glass top which is actually hinged...no need to pull the range out. Securely prop up the glass surface area and the burners are exposed. With a marker, mark where each color wire goes on the burner you are going to remove and also mark where the two holding brackets are. This way you can reference the locations to connect to the new one. Carefully remove the wires and brackets and install new burner with brackets and connections. Close up the top, replace two screws, turn on breaker, and if there were no other faulty components,it'll work great. P.S Be gentle getting the very snug wires off. Good Luck
Was this helpful?
Thank you for voting!
False Bottoms in both ovens had aluminum pans melted on them and couldn't be cleaned
3 of 3 people found this instruction helpful.
  • Raymond from MISSION VIEJO, CA
  • Very Easy
  • Less than 15 mins
  • Screw drivers
Use screwdriver to pull down tab on both hinges. Good hind on door and as you lower to full open door will come off. Pull old bottom, insert new bottom and put door back in slots. Close and then reopen to first position and push tabs back up to lock position
Was this helpful?
Thank you for voting!
Small front burner on our glass top stove died.
3 of 3 people found this instruction helpful.
  • Robert from FLEMING ISLE, FL
  • Really Easy
  • 15 - 30 mins
  • Screw drivers
Robert did not do the repairs. I did! 70 year old housewife. I watched a Utube video and thought I could certainly handle that. Ordered my part from your site. It came in two days. Burnet was replaced in under 20 minutes by me! Anyone can do this. Super easy, parts just plug in.
Was this helpful?
Thank you for voting!
Control awitch was bad
3 of 3 people found this instruction helpful.
  • Gary from CLEARWATER, FL
  • Easy
  • Less than 15 mins
  • Nutdriver, Pliers, Screw drivers
Just note the wire colors and match them where they go on the new control, remove and replace 7 screws and a zip tie and I was done.
Was this helpful?
Thank you for voting!
Oven meat probe broken
3 of 3 people found this instruction helpful.
  • robert from FAIRFIELD, OH
  • Very Easy
  • Less than 15 mins
This item worked as described. I paid more for this 'oem' probe than the generic 1 because i didn't want to chance it not working as others have reported.
- works great. tested it....snaps in, reads correctly, snaps out.
Was this helpful?
Thank you for voting!
F2 Warning - Oven overheating
3 of 3 people found this instruction helpful.
  • john from bend, OR
  • Really Easy
  • Less than 15 mins
  • Socket set
I checked various sites on the net and decided that the temperature sensor was the problem. The GE price for the replacement part was about $105, most of the other sites offered the sensor in the $70 range. PartSelect $12.95 When the part arrived, I removed a small self taping screw, pulled the high temperature wire connector into th e oven space, disconnected the quick disconnect fitting, attached the new temperature sensor, pushed the connecting wire into its hole, replaced the screw and that was it. I probably saved about $200 in parts and labor over what a local repairman would have charged. Oh yes!! I first disconnected the power at the breaker box. Very important.
Was this helpful?
Thank you for voting!
drwer slide under stove broke off.
3 of 4 people found this instruction helpful.
  • paul from sewell, NJ
  • Really Easy
  • Less than 15 mins
  • Screw drivers
recieved part the next day. looked different but I followed instructions and the part worked perfect.
Was this helpful?
Thank you for voting!
Burner Was Not Working
3 of 4 people found this instruction helpful.
  • Roland from Miami, FL
  • Easy
  • 15 - 30 mins
  • Nutdriver, Pliers, Screw drivers
Removed the two screws that hold the range top down. Lifted up yhe range top and propped with a stick. Proceeded to mark the wires connected to the old burner so that the new one would be connected correctly. Removed the wires and then the two brackets that hold the burner in place. Removed the old burner and installed the new one. C onnected the wires and resecured top to base. Turned on the current and it worked beautifully.
Was this helpful?
Thank you for voting!
the small burner was burnt out
2 of 2 people found this instruction helpful.
  • Jack from Columbiaville, MI
  • Easy
  • 15 - 30 mins
  • Screw drivers, Socket set
after removing the two screws that are just inside the oven, I propted the top open with the box that the part came in. I drew and labeled the wires as I took them off using a color coding. next I removed the two clips that held the burner in place and marked on the new burner exactly where the clips were attached. Replacing the clips was possibly the hardest part of the whole operation. When you replace the burner, don't forget to replace the insulation pad that is stuck one the metal where the conections are. I missed this and had to reopen the stovetop and slid it on after I was finished. Otherwise it went pretty smooth.
Was this helpful?
Thank you for voting!
Outer burner was not working
2 of 2 people found this instruction helpful.
  • Kevin from Leominster, MA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Very simple repair. Remove two screws to lift the range top. Then remove the two screws holding the element in place. Disconnect the wires from the old element, connect the wires to the new element. Reverse the procedure and you are done. Total time is anywhere from 15 to 30 minutes.
Was this helpful?
Thank you for voting!
Inner glass broke
2 of 2 people found this instruction helpful.
  • Mark from OLIVE BRANCH, MS
  • Easy
  • 30 - 60 mins
Removed torx screws for door handle as well as torx screws for both hinges to separate the door halves to extract broken glass and to install new glass panel. Other reviews said not to remove hinge screws, however I had no problem reinstalling them.
Was this helpful?
Thank you for voting!
Overheating dual element
2 of 2 people found this instruction helpful.
  • Alberto from TUCSON, AZ
  • Really Easy
  • 30 - 60 mins
  • Nutdriver, Pliers, Screw drivers, Wrench (Adjustable)
Not only did we (my wife did help) replace the dual element but afterwards we realized the control switch was not functioning properly and so that was replaced as well, and now our appliance works as intended. Also the instructions, are helpful as well. We used care not to force or over tighten anything and with two sets of eyes and the e xtra hands everything went much better. Anything that was removed was noted as to it's location and replaced .
Was this helpful?
Thank you for voting!
All Instructions for the JS968TF1WW
46 - 60 of 149