- Home
- JS966WD1WW
- Instructions
JS966WD1WW General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven temp. was not what setting called for
-
John from Acme, WA
- Easy
- 1- 2 hours
-
Nutdriver
turned oven off, pulled oven out from wall, removed back of oven, unscrewed sensor from oven replaced with new sensor, put back on, turned power to oven on, tried oven at 425, my temp. gage and the oven temp matched. a very easy fix.
Was this helpful?
Thank you for voting!
Broiler Element burnt out
-
Cherri from Katy, TX
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver
The actual repair was relatively easy but access to the area in the oven made it a little difficult. Just unscrew 5 screws with a nut driver, unplug the old element, plug in the new element and reinstall the 5 screws. The only thing that made this repair difficult was being able to reach the connectors where you plug in the new element.
... Read more
They are loose wire connectors that don't reach very far out of the element receptacle. It was difficult to hold the end of the connector and plug in the new element because the oven door is in your way. Maybe it is easier if you take the oven door off first?
Read less
Was this helpful?
Thank you for voting!
Broil element on top oven was not working
-
andrew from pittstown, NJ
- Easy
- 30 - 60 mins
-
Socket set
Shut the power off at the electric box.Disconnected coil from roof clips.Pulled wire connection from back wall. Disconnected wire clips, connected new unit.Clipped to roof and turned on" Working fine".
Was this helpful?
Thank you for voting!
Twisting of stuck cook-top killed the event
-
James from Kingsville, MD
- Difficult
- 30 - 60 mins
-
Screw drivers
The age of the system resulted in the cook top being heavily stuck by food-stuff to the range surface. The result was a twisting of the top when breaking it free. It caused the cooktop (a $500+ part) to crack diagonally across the whole surface. Thus ended the quick do-it-yourself process, and out to buy a new range. Parts-select was
... Read more
very good about the return process of the un-used and un-opened burner element.
Read less
Was this helpful?
Thank you for voting!