My Orders
JP661*V1 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Open circuit in the surface element
3 of 4 people
found this instruction helpful.
-
William from Murrysville, PA
- Really Easy
- Less than 15 mins
Plug-in new element
Was this helpful?
Thank you for voting!
No place in my area carry this type of range element
2 of 2 people
found this instruction helpful.
-
Michael from TAMPA, FL
- Very Easy
- Less than 15 mins
Was able to slide it right in
Was this helpful?
Thank you for voting!
no heat
2 of 3 people
found this instruction helpful.
-
Roderick A from Cherry Hill, NJ
- Really Easy
- Less than 15 mins
Unplugged bad surface element and plugged in replacement.
Was this helpful?
Thank you for voting!
Could not find a replacement part anywhere
2 of 3 people
found this instruction helpful.
-
Anthony from Bowden, WV
- Really Easy
- Less than 15 mins
The Surface Element on our GE stove made in the mid 70's finally gave up and would not heat. I went to several of the big home improvement stove with not luck in finding the right heating element for our stove so I turned to a local appliance stove that carries GE products, they did sell me an element and asured me it was the correct one,
... Read more
but once again the element was the wrong one. Then with a simple google search for GE replacment parts I found partselect.com. With the detailed description and images with measuring grids I was able to quickly find the correct heating element for me stove. I am very pleased and the stove is back to 100%.
Thanks partselect.com
Thanks partselect.com
Read less
Was this helpful?
Thank you for voting!
Element burned out
2 of 7 people
found this instruction helpful.
-
J. from Durham, NC
- Really Easy
- Less than 15 mins
Partselect had the right part, clearly indicated in the diagrams and menus. Shipped quickly. Easy to use web site.
Was this helpful?
Thank you for voting!
Range element failed to heat
0 of 1 people
found this instruction helpful.
-
Charles G from Columbia, MD
- Really Easy
- Less than 15 mins
Replacement element also failed to heat.
Possible that the problem is with the stove itself, not with the surface element.
Possible that the problem is with the stove itself, not with the surface element.
Was this helpful?
Thank you for voting!
Element wouldn't heat
0 of 1 people
found this instruction helpful.
-
Frank from Canyon Country, CA
- Really Easy
- Less than 15 mins
Just pull out the current element and plug-in the new one. Part was received in 24 hours.
Was this helpful?
Thank you for voting!
Both 8 inch surface units burned out
0 of 1 people
found this instruction helpful.
-
Catherine from Corinna, ME
- Really Easy
- Less than 15 mins
Simply unplug old unit and plug in the new. Easy
Was this helpful?
Thank you for voting!
Old Burner was crappin' out after 20 years of service
0 of 1 people
found this instruction helpful.
-
Jay from Madison, WI
- Really Easy
- Less than 15 mins
Pulled out the old burner that was held in by a metal spring clamp. Pushed the new one in.
Good as new.
Good as new.
Was this helpful?
Thank you for voting!
The old surface unit was not generating heat
0 of 1 people
found this instruction helpful.
-
Yi from Miami, FL
- Really Easy
- Less than 15 mins
We just remove the old surface unit and insert the new one by hand. Thanks to PartSelect, we were able to buy really good quality part that works right away! It was a 26-year-OLD GE Stove/Microwave space maker, the parts were hard to find in stores. Thank you for selling this! All the best for your business!
Was this helpful?
Thank you for voting!
burner would not keep heat
-
Marilyn from Cortlandt Manor, NY
- Really Easy
- Less than 15 mins
pulled out the old one pushed in the new one
Was this helpful?
Thank you for voting!
pre 1992 6" plug in electric cooking elements- rusted out
-
Ella from Tampa, FL
- Really Easy
- Less than 15 mins
Worked, don't have to replace an old GE combination range "Microwave Cooking Center" when the surface units rusted out.
Was this helpful?
Thank you for voting!
replace a burned out calrod unit
-
Albert R from Richmond, MO
- Really Easy
- Less than 15 mins
Simply unplugged the burned out one and plugged in the new one. It worked like a charm.
Was this helpful?
Thank you for voting!
Burner had burned out-needed replacement
-
Linda from Pagosa Springs, CO
- Really Easy
- Less than 15 mins
Plugged it in. It fit!
Was this helpful?
Thank you for voting!
Missing burner element
-
Kenneth from Corpus Christi, TX
- Really Easy
- Less than 15 mins
I bought the replacement element for my 98-year-old aunt, and she installed it.
Was this helpful?
Thank you for voting!