My Orders
JNM3163RJ6SS General Electric Microwave - Overview
Diagrams for JNM3163RJ6SS
See every part. Know exactly what you need.
Enter a part description. DIY Heroes keep it simple, eg. "belt" or "pump".
Search filter:
Clear Filter
Your search term must have 3 or more characters.
$13.92
In Stock
GREASE FILTER
Part #WB02X32793
This is a grease filter compatible with various microwaves. Grease filters are used to collect food grease and prevent buildups on the internal components of the microwave, such as the fans and other electronics. This grease filter is made of mesh and measures 7.5 inches long by 5 inches wide. If your current microwave grease filter is cl...Read moreogged with grease and not able to be easily cleaned, it should be replaced. This filter can be replaced easily by pulling on its D-clasp and pushing the new filter into place. Depending on how many filters your microwave uses, you may want to consider how many you need before ordering. This filter is an OEM part and is sold individually.
Read less
$27.56
In Stock
HALOGEN LAMP
Part #WB02X35488
Restore light inside the cooking area or over the cooktop with this replacement halogen lamp, it fits select microwaves, wall ovens, ranges, and microwave oven combos, disconnect the power before starting the repair, use the exact model number to confirm fit.
$35.80
In Stock
Stirrer Fan Cover
Part #WB06X10712
The stirrer fan cover in your microwave can be found on the roof of the microwave. It protects the fan from damage and debris. This fan cover is made of white plastic and is approximately 7.5 inches in diameter. Occasionally, the stirrer fan cover can melt, and become damaged. If you smell burning from your microwave or notice damage, the...Read more fan cover should be replaced. The stirrer fan cover is sold individually, and is an OEM part directly from the manufacturer.
Read less
$29.47
In Stock
$16.08
In Stock
Microwave Exhaust Adapter
Part #WB02X32715
This is the replacement damper bracket for your microwave. It is made of plastic and is approximately 11 inches wide and 3 inches long. The damper bracket attaches to the outer cabinet and directs airflow through the vent duct. The main reason you would replace the damper bracket is if it is damaged and will not hold the damper in place p...Read moreroperly. This part is sold individually and is a genuine OEM part sourced directly from the manufacturer.
Read less
$25.24
In Stock
Mounting Plate Assembly
Part #WB56X35363
This mounting plate, also known as a bracket, is crucial for keeping your microwave mounted to the wall, when placed above the stove. This OEM part is sold separately from the screws that are needed to hold it in place. You will need a screwdriver in order to secure the mounting bracket into place. Part has been substituted. Part is no lo...Read morenger a U-shaped bracket, it is now a flat mounting plate and will function the same.
Read less
$16.07
In Stock
Cable Assembly
Part #WB27X35382
This part is the replacement high-voltage diode for your microwave. It is approximately 3 inches long and is sold individually. The high voltage diode is an electrical current control device inside your microwave. Be sure to disconnect power to the microwave, and use extreme caution when completing this repair, as microwaves can still ret...Read moreain an electrical charge even when unplugged. This part is an authentic OEM part sourced directly from the manufacturer.
Read less
$39.45
In Stock
Monitor Interlock Switch
Part #WB24X25397
This switch monitor interlock is a critical safety component designed to ensure proper communication between the microwave door latch and the control board. When functioning correctly, it confirms that the door is securely closed before allowing the microwave to operate. A damaged or faulty switch may prevent the unit from starting, even ...Read moreif the door appears latched. Replacing this genuine part restores safe and reliable operation. Installation should be performed with care, and it's recommended to disconnect power before beginning any repair.
Read less
$12.85
In Stock
$104.33
In Stock
Microwave Vent Grille
Part #WB34X25406
The Vent grille covers components inside the microwave while allowing airflow through the slats.
$21.45
In Stock
DAMPER
Part #WB06X10686
This microwave vent damper assembly helps control airflow by directing exhaust out of the kitchen and preventing outside air, smoke, or odors from flowing back in when the fan is off. Made from durable metal, it can help reduce rattling noises and improve overall ventilation performance. Replacing a worn or damaged damper supports quieter operation and more efficient airflow.
$23.60
In Stock
Fan Blade
Part #WB06X10706
This fan blade, also known as a stirrer blade, is a genuine OEM replacement part for your microwave. This is a fairly easy repair. To complete it, you will need a screwdriver to disassemble the fan assembly. Unplug the microwave before you begin this repair. Remove the fan cover and existing fan blade, and screw the new one in place. Reassemble all parts.
Common Symptoms of the JNM3163RJ6SS
How this model fails, and the parts that fix it.
No heat
Fixed by
these parts
these parts
Show All
Won’t turn on
Fixed by
these parts
these parts
Show All
Doesn’t shut off
Fixed by
these parts
these parts
Show All
Touchpad does not respond
Fixed by
these parts
these parts
Show All
Door not closing properly
Fixed by
these parts
these parts
Show All
Tray won’t turn
Fixed by
these parts
these parts
Show All
See how others fixed this model. Time, tools, difficulty, and steps that lead to victory!
View More
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
cover stirrer fan was burned and sparking in three part even the plastic rivet
12 of 15 people
found this instruction helpful.
just in 1 2 3 step easy way. First unplug the power cord,use a small flat-head screwdriver to pull out the plastic rivet pin,rotate the old cover counter clockwise to removed lift out the blade assembly, install the new cover stirrer fan by first positioning the blade assembly then align the cover and rotate it clockwise to secure, then r
... Read more
eplace the mounting plastic rivet pin;with the repair completed, plug the power cord back in and your microwave oven should be ready for use again. : )
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!