All Installation Instructions for Hotpoint Range JN322002

broken fan blade in the freezer compartment

7 of 9 people found this instruction helpful.

John from Cumberland, MD
Really Easy
Less than 15 mins
Pliers

Unplugged frige, removed top shelf, pulled broken fan blade off. Replaced with fan blade just purchased from PartSelect. Very simple repair. Orderd and recieved the right part.

Was this helpful?

a fan blade broken causing it to make a loud noise

3 of 5 people found this instruction helpful.

Marnie from Denver, CO
Really Easy
Less than 15 mins
Pliers

we took off the old one and replaced it.

Was this helpful?

family member melted fan with hair dryer

1 person found this instruction helpful.

Lauraine from Rocky Hill, CT
Really Easy
Less than 15 mins
Screw drivers

Unplugged fridge.Removed 2 screws holding a panel. After panel removed took off old fan and inserted new. Quite simple.

Was this helpful?

Fan blade broken

2 of 5 people found this instruction helpful.

John from Cumberland, MD
Really Easy
Less than 15 mins

Removed the broken fan blade (just pulled off) and replaced with part purchased PartSelect. Very easy repair, no tools required.

Was this helpful?

Lamp switch would not return to original position rendering the switch inoperable.

1 of 2 people found this instruction helpful.

Richard from Lynn, MA
A Bit Difficult
15 - 30 mins
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set

Remove 6 screws that hold the light and fan filter in place. Remove the four bolts that hold the control panel. Remove the four screws that hold the circuit board to the control panel. Disconnect the wires to the switch. Replace switch and reverse the disassembly procedure.

Was this helpful?

Noisy fan

Robert L. from Eldred, PA
Really Easy
15 - 30 mins
Screw drivers

Emptied freezes, turned off power, took floor of freezer out [4 screws ], took two screws out of fan mounts and replaces fan. Reassembled by reverse process. Simple

Was this helpful?

JN322002 Hotpoint Range - Instructions