- Home
- JGSP28CEKC
- Instructions
JGSP28CEKC General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Broken drawer support
-
Mario from Deer Park, WA
- Really Easy
- Less than 15 mins
-
Nutdriver
Followed the example picture on the part bag. Anyone could do this, incredibly easy. Took about 4 minutes to install both sides.
Was this helpful?
Thank you for voting!
Range lower drawer would not stay on track.
-
Richard from Newark, DE
- Really Easy
- Less than 15 mins
-
Nutdriver
Easy to install replacement parts using the screws provided.
Was this helpful?
Thank you for voting!
The spark module would constantly spark
-
Douglas from Knoxville, TN
- Really Easy
- Less than 15 mins
-
Screw drivers
I ordered the spark module and replaced it which was veru simple, plugged it in and it sparked only now and again. I finally said forget it and it has now stopped sparking but for how long I do not know.
Was this helpful?
Thank you for voting!
Chipping around edges of Burner Caps
-
Howard from Yorba Linda, CA
- Really Easy
- Less than 15 mins
Received the parts very expeditiously(2 days from time of placing the order), and the replacing of the caps was a "no brainer".
Other Parts Used:
Was this helpful?
Thank you for voting!
Open door. Put racks in.
-
Harriet from Jacksonville Beach, FL
- Really Easy
- Less than 15 mins
nothing to it.
Was this helpful?
Thank you for voting!
Stove drawer rear guides broken
-
Robert from Shakopee, MN
- Really Easy
- Less than 15 mins
-
Nutdriver
Installed new guides with a nut driver without any problems.
Was this helpful?
Thank you for voting!
Missing oven rack
-
Damaris from Easton, PA
- Really Easy
- Less than 15 mins
I opened oven and pushed oven rack inside.
Was this helpful?
Thank you for voting!
oven not warming, f2 indicating overheat
-
David from Lisle, IL
- Really Easy
- Less than 15 mins
-
Nutdriver
Removed 4 screws from back panel, disconnected small electricsl connector from sensor, removed one mounting screw from sensor inside oven,pulled wires through and removed old sensor. Fed wires for new sensor through and connected electrical connector, installed panel, installed mounting screw on sensor and checked oven, worked like a cham
... Read more
p. Took 5 minutes.
Read less
Was this helpful?
Thank you for voting!
no racks to oven
-
Johnette from Baltimore, MD
- Really Easy
- Less than 15 mins
Easily glide in.
Was this helpful?
Thank you for voting!
the grate foots came off
-
Sandra from Watertown, MA
- Really Easy
- Less than 15 mins
put it in but it keeps falling out. they're made narrower than my oven grate.
Was this helpful?
Thank you for voting!
Hard to move drawer in and out because the rear drawer supports broke off.
-
Steven from Lansdale, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Repair was very easy - less than a few minutes - just had to screw in 2 screws to the new drawer supports.
Was this helpful?
Thank you for voting!
Missing grate foot.
-
Barbara J from Sweetwater, TX
- Really Easy
- Less than 15 mins
-
Pliers
Ordered by phone parts & very pleased with all of transaction.
Was this helpful?
Thank you for voting!
Replace medium burner for gas cooktop
-
Charles from Houston, TX
- Really Easy
- Less than 15 mins
Very easy to remove grates, burner cover and remove old burner head. Very simple process, but surprised that there was no efficient way to clean carbon deposits from my old burner. Burner video instructions on line insured I installed the new burner head correctly (actually, pretty hard to get wrong), and burner worked correctly immediate
... Read more
ly. Will likely replace other burners in time as the new one is so "silvery" colored compared to my other burners.
Read less
Was this helpful?
Thank you for voting!
Grate Foot Have 8 For My Stove And One Breaks Every Now And Then
-
Lee from Kenner, LA
- Really Easy
- Less than 15 mins
This was and always will be an easy fix, all I have to do is get my ice pick and pick the broken rubber part stuck in the hole if it does not break clean and fall out. Not much more I can say about this simple problem.
Was this helpful?
Thank you for voting!
gasket on door was brittle
-
Barbara from Bethesda, MD
- Really Easy
- Less than 15 mins
I feel like Macho Mom. I called in the repair guy since I was afraid of dealing with the gas. HE repaired one item but could tell I was comfortable fixing things and pointed out that the gasket was brittle and would cause major problems if not replaced. Took longer to order the part than do the repair, don't know what I was afraid of!
Was this helpful?
Thank you for voting!