- Home
- JGSP28CEKC
- Instructions
JGSP28CEKC General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oven Light Assembly damaged
5 of 10 people
found this instruction helpful.
-
Jose from Frederick, MD
- Really Easy
- 15 - 30 mins
-
Nutdriver, Pliers
I have a double oven and coincidently I had to replace the two Oven Light Assemblies.
I am really glad about your web site because once I got the number from my oven model you guys were the first ones that came up. Thanks to your prompt and reliable service my oven is back to its original state.
Jose Figueroa
I am really glad about your web site because once I got the number from my oven model you guys were the first ones that came up. Thanks to your prompt and reliable service my oven is back to its original state.
Jose Figueroa
Was this helpful?
Thank you for voting!
drwer slide under stove broke off.
3 of 4 people
found this instruction helpful.
-
paul from sewell, NJ
- Really Easy
- Less than 15 mins
-
Screw drivers
recieved part the next day. looked different but I followed instructions and the part worked perfect.
Was this helpful?
Thank you for voting!
Missing Burner Caps.
3 of 5 people
found this instruction helpful.
-
GLENDA from HENDERSON, NV
- Really Easy
- Less than 15 mins
Caps were shipping very quickly. Price was very reasonable. Very happy with parts-selects service.
Other Parts Used:
Was this helpful?
Thank you for voting!
Replace Thermostat
2 of 2 people
found this instruction helpful.
-
Russell from Morgantown, WV
- Really Easy
- Less than 15 mins
-
Socket set
Pull oven out away from the wall, unplugged from outlet, removed center cover by removing 5 sheet metal screws. disconnected thermostat sensor from control cable. Opened oven door and removed screw that holds thermostat sensor. Pulled thermostat sensor out replaced with new sensor. Plugged sensor in to control cable. Replace panel and scr
... Read more
ews. Then my wife made me clean the oven. I recommend making the repair when your wife is not home.
Read less
Was this helpful?
Thank you for voting!
lights blown out
6 of 14 people
found this instruction helpful.
-
Gerald from WINTERVILLE, GA
- Very Easy
- Less than 15 mins
replaced lights in refrigirator and freezer
Was this helpful?
Thank you for voting!
Oven drawer open and close incorrectly
2 of 2 people
found this instruction helpful.
-
James from Goldsboro, NC
- Easy
- Less than 15 mins
-
Screw drivers
First I removed the oven drawer. Verified that the support clips would rest correctly on rail, then review installation document with supports to locate alternate location for replacement supports. I did have to personally locate 2 fastners not provided with the supports ot complete installation. After installation, oven drawer opens a
... Read more
nd closes smoothly.
Read less
Was this helpful?
Thank you for voting!
The burner caps were chipped and discolored.
2 of 2 people
found this instruction helpful.
-
Anne from OSSINING, NY
- Very Easy
- Less than 15 mins
I merely replaced the old caps with the new ones. It couldn't have been easier!
Other Parts Used:
Was this helpful?
Thank you for voting!
GOT 1-SMALL 2-MEDIUM 0-LARGE CAPS
2 of 2 people
found this instruction helpful.
-
Teddy from Bel Air, MD
- Difficult
- Less than 15 mins
PLEASE BE ADVISED WHEN THEY SHIPPED THE BACK ORDER 1 -(taupe) LARGE CAP - RECEIVED 4 BLACK CAPS - 1-SMALL
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!
Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!
... Read more r />your advice?
2-MEDIUM 1-LARGE (ALL BLACK) - STILL LOOKING FOR
A LARGE CAP IN taupe color!
Received refund for 1-large cap
PROBLEM IS ALL OTHER PARTS ON THE GAS STOVE
ARE taupe in color - do not want black!
... Read more r />your advice?
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
oven racks very old and writing on knobs worn ff
2 of 2 people
found this instruction helpful.
-
Patricia from SAN JOSE, CA
- Very Easy
- Less than 15 mins
Very was ti replace racks and knobs. Very fast mail service
Was this helpful?
Thank you for voting!
broken light cover
2 of 2 people
found this instruction helpful.
-
Francis from LAKE ELSINORE, CA
- Very Easy
- Less than 15 mins
twisted it in place
Was this helpful?
Thank you for voting!
Stove overheated with an F2 error
2 of 2 people
found this instruction helpful.
-
Richard from PHOENIX, AZ
- Easy
- 15 - 30 mins
-
Nutdriver
Removed screws holding temp sensor, pulled wire out from behind wall until found connector, disconnected old sensor.
Measured resistance of old sensor and compared with new sensor, they measured nearly the same. Installed the new sensor and tested the stove. Came up to temp ok. No problem since, about 2 weeks.
Measured resistance of old sensor and compared with new sensor, they measured nearly the same. Installed the new sensor and tested the stove. Came up to temp ok. No problem since, about 2 weeks.
Was this helpful?
Thank you for voting!
Broiler worked, no oven
2 of 2 people
found this instruction helpful.
-
ROBERT from BOSTON, MA
- Easy
- 1- 2 hours
-
Nutdriver, Screw drivers, Socket set
Other people had problems removing screws for igniter and broke them off. The best way to prevent this is to initially tighten the screw and then loosen. Using this method going back and forth will prevent breaking off the screw. You will have to remove the plate on the back of the oven to access the connector. There wasn't enough slack f
... Read more
or me to pull it through.
Read less
Was this helpful?
Thank you for voting!
The oven igniter failed
2 of 2 people
found this instruction helpful.
-
Peter from YONKERS, NY
- Difficult
- 30 - 60 mins
-
Socket set
The repair is not complete because the two screws that hold the igniter to the oven Burner Assembly tube were frozen in place, probably from the heat over time: One stripped and the other broke, necessitating the removal and purchase of the oven burner tube and screws.
Was this helpful?
Thank you for voting!
feet keep falling off
2 of 3 people
found this instruction helpful.
-
Richard from Stratham, NH
- Really Easy
- Less than 15 mins
Inserted the grate foot into the spot provided; after consulting the parts manuel to insure I was using the proper procedure.
I do use silicone to help hold the foot but it still won't hold
I do use silicone to help hold the foot but it still won't hold
Was this helpful?
Thank you for voting!
Rubber Grate foot worn or missing.
2 of 3 people
found this instruction helpful.
-
Terry L from Puyallup, WA
- Really Easy
- Less than 15 mins
Replaced worn or missing Grate Foot with new ones. Took less than 5 minutes.
Was this helpful?
Thank you for voting!