Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Grate Foot had worn out
24 of 34 peoplefound this instruction helpful.
Kathryn from Star City, AR
Really Easy
Less than 15 mins
A rubber grate foot on my range top had worn out. I pulled the worn foot out and installed the new grate foot with no tools or accessories. Good as new! Now I don't have to worry about the grate scraping my range top and scratching the paint. I also ordered extras so I won't have to wait if another wears out.
Was this helpful?
Thank you for voting!
burner would not lite
23 of 34 peoplefound this instruction helpful.
Glen from Kenner, LA
Really Easy
Less than 15 mins
Screw drivers
openend stove top disconnected wire pushed out old sparker inserted new one closed lid game over
Was this helpful?
Thank you for voting!
burner would not light properly and flame uneven around the burner
9 of 10 peoplefound this instruction helpful.
Bret from South Haven, MI
Really Easy
Less than 15 mins
determined that the top of the burner was melted and malformed. Repair was simple: lifted off the damaged burner and slipped the new one in place.
Was this helpful?
Thank you for voting!
Our burner caps had started chipping.
12 of 20 peoplefound this instruction helpful.
Kim from Santa Rosa, CA
Really Easy
Less than 15 mins
Was able to see the exact part with easy to read schematic so I knew I was ordering the right part. Then just switched out the old for the new. Looks like a new cooktop except for the scratches in the stainless, but we are working on that! Thanks!
Change bad/broken igniter on gas stove top burners
6 of 6 peoplefound this instruction helpful.
James from Kaplan, LA
Really Easy
Less than 15 mins
Very simple repair with no tools required. Turn off power to stove. Remove grates, remove burner, pull old Top Burner Spark Electrode up being careful not to jerk it up hard - wiggle if necessary, unplug wire from old electrode, plug wire into new electrode making sure it fits snug - if not, squeeze it closed a little at a time until it f
... Read moreits snug, push new igniter into place being careful not to force it and crack the ceramic body. Install burner being careful not to damage the electrode, Install grates. Turn power back on and test to make sure it works. It took me all of 15 minutes to change 2 burner spark electrodes. The only bad thing about this repair is that the shipping costs as much as the parts.
Read less
Was this helpful?
Thank you for voting!
Knob “insert” part broke so was unable to turn on burner
6 of 7 peoplefound this instruction helpful.
Yvonne from BARNEGAT, NJ
Very Easy
Less than 15 mins
Placed it on after removing broken knobs
Was this helpful?
Thank you for voting!
Burnt burner
7 of 12 peoplefound this instruction helpful.
Janine from Wind Gap, PA
Really Easy
Less than 15 mins
Just put it on. Quite proud of myself for figuring out what and how to get the part however! The website was very helpful.
Was this helpful?
Thank you for voting!
Needed To Replace Burner
5 of 6 peoplefound this instruction helpful.
Robert K from York, PA
Really Easy
Less than 15 mins
Took longer to open the box.
Was this helpful?
Thank you for voting!
After my housecleaner had been here, I noted that 2 of the little rubber feet were missing from the top grates.
4 of 5 peoplefound this instruction helpful.
Anne from Jacksonville, FL
Really Easy
Less than 15 mins
I was pretty upset as the grate wobbled, so I went on line and looked for GE Profile parts. To my amazement, I found the little rubber feet quite easily, and within 2 days they were here at my home. I simply had to stick them in the holes; however, I noted that they did not fit real tight, so I removed them and shot a little glue on the
... Read morem, and they have been in place ever since. Thanks to you guys, I am a happy camper now!!!
Read less
Was this helpful?
Thank you for voting!
burner caps began to chip
5 of 9 peoplefound this instruction helpful.
Anne from Plainview, NY
Really Easy
Less than 15 mins
I removed the two range grills. Then I removed the two chipped burner caps, and replaced them with the new burner caps. I then replaced the two range grills.
Order parts and installed - no tools needed - completed repairs less than 1 minute
Was this helpful?
Thank you for voting!
Gas range igniter was making a clicking sound every 3 to 5 minutes, as if it was trying to ignite one of the burners.
3 of 3 peoplefound this instruction helpful.
Wesley from FRANKLIN, TN
Really Easy
15 - 30 mins
Pliers
Unplug the range from its wall socket to avoid electric shock. The various range parts that support a pot or frypan are easily lifted off their perches, exposing the small white igniter. The only moderately difficult aspect is wiggling the igniter out of its retainer. The electric wire leading into it then can be pulled out and fed int
... Read moreo the new igniter with a push. Replace igniter in its retainer, then replace the range parts you removed to expose the igniter and plug the range back into the wall socket. Piece of cake.
Read less
Was this helpful?
Thank you for voting!
THE OLD BURNER HEAD WAS NOT TURNING ON PROPERLY AND THE GAS CAME OUT UNEVEN.
First take picture of cooktop. Go below cooktop and unplug electrical and turn off gas valve. Set burner greats aside along with bummer caps. Pull control knobs straight up and off, and set aside. Use 15 torque driver and remove two torque screws from each burner bases. Pull each white igniter up while holding the burner base in plac
... Read moree. There is a wire attached to each igniter, separate the wire from the igniter and set aside. Once all igniters are removed, carefully remove all burner bases and set aside. Now lift top cover off. As you’re lifting the cover careful of the igniter wires. Now take another picture to refer to when installing new igniter harness. Notice where the harness plugs in and use pliers to remove the two plug connections from the igniter module. Then remove the rest of the harness from the top of the gas valves. Vacuum debris and clean up tray. Your last photo will be handy, refer to when installing igniter harness. Orient. All burner igniter switches the same on each gas valve. Check for wire clearance on wire harness. Reinstall top, guide igniter wires up through top, relocate burner bases in correct locations. Start all torque screws, leave loose until all igniters are reconnected and placed back down in there holes. Then tighten all torque screws. Reinstall burner caps, control knobs, and greats. Go underneath and plug in power cord and turn gas valve on. Check all burners for correct operation.
My Orders
