JGHP66GEJ4 General Electric Range - Instructions

The stove is over 20 years old, it was bound to happen. Because PartSelect.com has pictures of the part from three different views & detailed measurements, I was more confident that this part would be what I would need. When the part arrived in just 2-3 days, I opened the package, and slipped it into the socket... DONE ....Easy!!

Unplugged the appliance for safety. Removed two 1/4" screws that held the assembly in place. Carefully removed the wire guard that retains the glass shield. Unscrewed old light bulb and replaced with new part. Reversed the steps after cleaning glass cover.

I had to call for a appointment for repair with GE Appliance because I thought then it . .was something electrical. The technician came out & checked everything out, turned out it was not electrical, The technician went out to his truck got a light bulb from his truck, put it in & it worked. It cost me $121.00 for trip charge from GE appl ... Read more iance for a light bulb that worked, your light bulbs were defective twice. Very disappointed with your products, cost me alot of money for a good light bulb thru GE appliance

Took amp reading, which was 2.5 amps, that identified that the igniter needed to be replaced, for the safety valve requires 3.2 amps or better. Replaced, and everything is okay.

Opened the package. Took out the knob. Put knob on spindle. The neat thing is it's an EXACT match! No bushings or adapters needed. No color difference; all the markings are identical. YAY!! I will be back, as all my appliances are aging sharply!

just pushed on the new control knob, no tools it was quick and eacy with the right part

No problem getting to igniter in oven to remove from holder. Difficult to disconnect igniter at rear after removing drawer. Just hard to get to. Broke one of the plug-in receivers so had to crimp on a new one. This was a hinged pair that received the igniter lead and another lead that went to another part.

First wrote a wiring diagram then disconnected old igniter by removing two screws and unplugging.
Then just reversed the whole operation.
However, it never worked because the "oven/broiler" switch broke.
Its time for a new stove.
But I would recommend PartsSelect to anybody.
Your selection is great, you shipped as ... Read more promised, and the best part was the price.

Ordered new igniter switch, but Fedex lost it! Partselect sent new one overnight. Really a cinch to install. Be sure to unplug oven or turn off breaker if you are not comfortable with working with live electrical wires!

took off the old knob replace it with the new knob

replaced lights in refrigirator and freezer

The repair in my situation is very easy and simple. Just push new control knob into the valve and it's done. I am pleased with my order and I received it sooner than I expected.

The new knob was the exact part. It slipped right on.

Changed the knob. Just like that, it worked like a charm.

0. As a safety precaution, unplug the range or hit the relevant fuse breaker before you start. You might also want to grab a flashlight. Definitely do not try to do this while the oven is hot.
1. Pinch the wire over the light bulb cap to remove it. This is inside the oven at the back.
2. Pop off the hemispherical glass cap.
... Read more />3. Unscrew the old light bulb, and screw the new light bulb in its place.
4. Put the cap back.
5. Secure the cap by putting the wire back in its slots on the cap.

No tools needed, the cap is just held in place with pressure from the wire.